Windows 10: My hard drive will not let me access it

So I have a 1TB Toshiba external hard drive and it will not let me access it. I will try to click on it and then it will crash my file explorer and also my taskbar will disappear for a minute at most. I have also tried going into the properties of it but it won't let me do a scan of it. I really need the extra space and cannot get another one as of now so I want to know if I will be able to get this to work.

:)

 

Location is not available F:/ is not accessible. Access is denied. External hard drive

Hi,

Most of the time, when your external hard drive shows that error message, it suggests that you don’t have the privilege of accessing to the disk partition. We need to get a permit to take ownership of the drive. Follow the steps below:

• Open File Explorer.
  
• Right-click your hard drive, then select Properties.
  
• Go to Security tab.
  
• Click Advanced, then select Edit.
  
• On the Owner tab, modify the ownership of the specified account.
  
• Click Apply, then OK.
  

Update us with the outcome so we can provide further assistance.

 

Unable to access the external hard drive after upgrading to Windows 10

Hi Alan,

As you are facing issues with accessing the external hard drive after upgrading to Windows 10, do not worry we will help you with this issue.

Do provide us additional information to assist you better with this issue:

• What is the make and model of your devices?
• What exactly happens when you try to access the drive?
• What is the complete error message/ error code of this issue?
• Were you able to detect the device under Device Manager/ File Explorer?

Step 1: As a workaround, I suggest you to do the following to detect the issue:

• Connect the hard drive to different port and check if the issue persists.
• Connect different hard drive to the same port and check.
• Connect different hard drives to different ports and check.

Step 2: If the device is not detected on your computer try to run
Hardware and Devices troubleshooter as it checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the Hardware and Device
  Troubleshooter

Step 3: I suggest you to check if there are any drivers with yellow exclamatory mark in the Device Manager.

• Press Windows + X from the keyboard, click on
  Device Manager.
• Right click on the detected driver, click on Properties
  and check the device status.
  

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!