Windows 10: My hard drives restarts theirselves under load

So a year ago i had a 500gb hdd and a sata ssd. Then i got a 1TB hdd and installed it but 500gb one started to restart itself everytime i try to do anything with it so i unplugged it and put it in my "Drawer of Abandoned Tech". Now i bought a nvme ssd and installed it and my 1tb hdd started to do the same. They keep restarting under load.I also checked their health with hard disk sentinel but they both have 100% healthWhen i try to transfer files, download files, play any game and even when i check what files do i have it just restarts itself repeatedly

:)

 

Hard drive/ OS issue

a guy suggested :

• shutdown
• unhooked HDD
• restarted
• yay !!
• reconnected HDD
• restarted
• yay !!

also , try method 3
Drive Where Windows is Installed is Locked: How to Unlock It

 

Maxtor Hard Drive Beep

Maxtor drive beeps

Have a similiar situation using a DiamondMax Plus 8, 20GB Mfg Date 4/15/03. Drive used as a second system drive. Drive is recognized in boot menu but not in drive list. Drive is always connected. Computer started locking up for several seconds at a time. Chkdsk on drives and couldn't find that drive. Removed drive from bay to make sure connections were ok and heard the beeping. Shutdown and restart and never got to windows screen. Restarted several times then saw drive in boot menu and Windows loaded but Maxtor not in drive menu. When recognized in boot menu, computer will start but beeps and is not found.

Tried kicking it real hard but no improvement. Any suggestions?

 

Overclock your hard drive!!!

Heres a much easier hack that I realized quite a few years ago that really does work!

REQUIREMENTS:

• Hard drive with molex power connection.
• PSU with more than 1 strand that has molex plugs on it.
• Wire strippers, soldering iron if you're fancy, electrical tape if you're not.

STEPS:

• Take the strand of connectors from your PSU, and decide which one will be the donator for this overclocking adventure.
• Cut the yellow and orange cables, then twist them together.
• Find the power connector you've chosen as the overclocking connector, and release the orange cable from the connector. Now use your preferred method to bind them together, then place it back together.
• Plug in a drive and feel the speed!

Congratulations! You've just overclocked your hard drive!