Windows 10: My Home group not visible in my OPC communication software.

Hi

I am using windows 10 pro Version-1809,

Actually i am trying OPC DA Communication in between two Windows PC, Both PC have Same OS mentioned above.

I installed my OPC software on both software.


I want to access my home group PCs from both PCs OPC software, But it happen only from one PC


Ex: take i have two PCs PC1 & PC2

If PC1 on first i can access my client list from PC1, From PC2 i could not

If PC2 on first i can access my client list from PC2, From PC1 i could not


I tried below solution, but for my case OPC Communication its not worked.


Kindly help me to solve this issue.



Windows 10 no workgroup - not seen on network

Troubleshooting 1:

Open Start > Settings > Network & Internet > Status
Scroll to the bottom
Click Network and Sharing Center

Click Change advanced sharing settings
Expand All Networks
Under Password protected sharing

Switch between 'Turn on password protected sharing and Turn off password protected sharing'

Then choose 'Turn off password protected sharing'

Then click 'Save changes'

Troubleshooting 2:

Press Windows key + R
Type: optionalfeatures.exe
Hit Enter

Scroll down to SMB 1.0/CIFS File Sharing Support
Tick the SMB 1.0/CIFS Client
Untick SMB 1.0/CIFS Automatic Removal and
Untick SMB 1.0/CIFS Server


Click OK
Restart if prompted.

Troubleshooting 3:

Additional troubleshooting steps you can attempt:
- shut all computer and network gear down.
- Turn off IPv6
- Try browsing to some of the computers manually, press Windows key + R, type: \\computername, hit Enter
- Press Windows key + R
Type: services.msc
Hit Enter

Other things you can do:

Press the Windows Key and R at the same time to bring up the Run dialog.
Type services.msc in the Run dialog and press Enter.
For each of the following services, locate the service in list, right-click the service and select Properties. Then set the Startup type to Automatic Delayed Start and select Apply.
Computer Browser Browser
Function Discovery Provider Host FDPHost
Function Discovery Resource Publication FDResPub
Network Connections NetMan
UPnP Device Host UPnPHost
Peer Name Resolution Protocol PNRPSvc
Peer Networking Grouping P2PSvc
Peer Networking Identity Manager P2PIMSvc
Restart Windows.

Troubleshooting 4:

Press Windows key + X > computer management-->shared folders--> choose the shared folder, right click it then click Properties > Share Permissions -->protection that everyone can read and execute, see folder contents and read permissions.

:)

 

regarding windows 10 home group options

Hi,

Thank you for posting your query on Microsoft Community. Let me assist you.

These may be the below possible reasons of you facing the issue. Please go through the points.

• If a Home group already exists on your network, you'll be asked to join it instead of creating a new one.
• If your PC belongs to a domain, you can join a home group but you can't create one. You can get to libraries and devices on other home group PCs, but you can't share your own libraries and devices with the home group.

If both the above scenarios doesn’t imply, then I would suggest you try the below steps.

Steps:

• 
  Switch to an Administrator user account, in case you are not using one.
  
• 
  Run a Home group Troubleshooter to fix the issue.
  

Refer the below steps to run a Home group Troubleshooter.

• 
  Press Windows + X keys on the keyboard and select
  Control Panel
  
• 
  Type Troubleshooting in the search bar on the
  Control Panel.
  
• 
  Click on View all on the left navigation pane. Click on
  Home group.
  
• 
  Click on Advanced on the Home group troubleshooter dialog box and click on
  Run as administrator (Enter the credentials if required).
  
• 
  Click on Next and follow onscreen instruction complete the
  Home group troubleshooter
  

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.

 

Starting Home Group Listener gives no more endpoints available

Hi,

I suggest you to run the inbuilt home group Troubleshooter and check if this helps. Follow these steps to run the troubleshooter:

• In the search box, type ‘Troubleshooter’, and then click
  ‘Troubleshooting’.
• Click on view all.
• Select Home group from the list and follow the onscreen instructions.

Hope this helps. Get back to us with the results for further assistance.

 

home group

Hi. stetmor

My Name is David B.

Independent Advisor I'd like to help.

First, in this case, if there is already a home group in your home network, you can join it, as follows:

1. Open Grupo Hogar. To do this, click the Start button, click Control Panel, type home group in the search box, and then click Home Group.

2. On the Share with other home computers that are running Windows 7 page, click Create a group at home and then follow the instructions.

Notes: If there is already a home group in your home network, you will be asked if you want to join it instead of creating a new one.

If your PC belongs to a domain, you can join a group at home but you cannot create a new one. You can access files and resources from other teams in the group at home, but you cannot share your own files and resources with the group at home.

After creating a group at home, other computers running Windows 7 on the network can join it.

Add other equipment to the group at home:

After creating a home group in the network, the next step is to join that group. You will need the password of the group at home, which can be provided by the person who created the group at home.

To join a group at home, follow these steps on the team you want to add to the group at home:

1. Open Grupo Hogar. To do this, click the Start button, click Control Panel, type home group in the search box, and then click Home Group.

2. Click Join now and follow the instructions on the screen.

Note: If you don't see the Join Now button, there may not be any groups available in the home. Make sure someone has created a group at home or create one yourself.

Access the archives of the group at home:

Computers that belong to your home group will appear in Windows Explorer.

To access the files or folders of other computers in the group at home

1. Click the Start button and then click on your username.

2. In the navigation pane (left panel), in Home Group, click on the name of the user account of the person whose files you want to access.

3. In the file list, double-click the library you want to access, and then double-click the file or folder you want.

Notes: Devices that are turned off, in hibernate mode or suspended will not appear in the navigation pane.

If you have made some files or folders in the home group available offline, and then you disconnect from the network, the files or folders will no longer be visible in the Libraries window. To find them, open the Network folder.

Regards...