Windows 10: My HP laptop freezes and i cant use the standard methods

Sorry for my name, but somehow my HP laptop froze while CODING, and i can't reset the graphics drivers, use Ctrl+Alt+Delete or ANYTHING..The only thing that happens is my laptop's screen turning off when it gets close to closing... Please help.

:)

 

Hp laptop screen won’t display except occasionally

- this suggests BIOS corruption or a hardware problem...
Whilst you might try flashing the BIOS (updating it may be necessary to run Win 10- witness your problem above), you also say you have access to it.
Do you hear any beeps or sounds?

Try steps 1,2 here:
Laptop freezes at HP logo without loading circle - HP Support Forum - 5997641

Check the version of your BIOS vs that listed on HP's site for your laptop.

I'm also wondering if this might be related to your CMOS battery inside your laptop. (This should be a normal circular battery).
How to replace the CMOS battery
- but that's just a thought.

Worth asking on the HP forum.

================================
Sorry that's not how to create a bootable disk. All that disk is is data storage- as you just copied the files to it.

Please see:
How to Create a Bootable DOS USB Drive
for one way to do it using a free program.

However, given the above, doing that isn't likely to help you I'm afraid.

 

Laptop freezes when moved slightly

Dear Sachin,

the answer to your questions are given below:

1. HP Pavillion p045tx notebook

2.No i didn't make any changes

3. How to check the 3rd step?Please let know what to do.

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.