Windows 10: My Hp pavilion desktop all in 1 turns on then beeps once then shuts off

I replaced the HDD with a sdd didn't work. I think it is the cd reader I am not sure but the desktop is old.

:)

 

HP Pavilion 15 randomly shuts down incorrectly if fast startup enabled

I've just updated an HP Pavilion 15 from Windows 8.1 to Windows 10 (Home 64 bit). If fast startup is enabled, the laptop freezes at the very least step of the shutting down process. The shutting down process goes like this:

1. First you click on shut down
2. The shut down screen appears
3. The screen turns off and then the fan starts to spin at high speed
4. After 4-5 seconds, the fan stops
5. The laptop is completely turned off, no lights are turned on (in most of PC's)

Well, my problem is that randomly, the Pavilion 15 freezes after step 4 has been completed, with the light of the ON/OFF button turned on forever. Sometimes it turns off correctly, but many other times this happens. If I disable the fast startup, this won't happen and it will always turn off correctly.

What can I do?
How is it that it's random?

I've tested this with no apps running on background, so that can't be the reason, besides, no apps or programs can freeze the system after the step 4 has been completed, since they are all shut down after step 1.

Also, the fast startup option was activated when I was using Windows 8.1 and never had a single problem with this laptop.

 

Unable to boot into the Desktop on HP Pavilion 20-b014

Hi Tophy,

Thank you for performing the troubleshooting steps to resolve the issue from your end.

I apologize for the inconvenience caused to you, I realize this may be frustrating.

This issue might occur, if there is an issue with hardware and drivers.

Before proceeding further, I would like to ask few questions:

• 
  Are you referring to HP Pavilion Laptop or Desktop?
  
• 
  Did you try reaching BIOS using external keyboard (if you are using Laptop)?
  

Please follow below mentioned methods to resolve the issue:

Method 1:
If you are using HP Pavilion
Laptop.

Please Connect to External keyboard and try below mentioned steps:

• Restart Laptop and click any function keys
  Like F2, F10, ESC, or DEL key to begin the BIOS Setup.
  
• Look for a tab in the BIOS Setup Utility that is labeled
  Boot Order, Boot Options, or Boot. Following the directions on the screen, use the arrow keys to go to the
  Boot Order, then press Enter.
• Locate the CD, DVD, or USB flash drive (this might be called Removable Device) in the Boot list. Following the directions on the screen, use the arrow keys to move the drive up so that it appears first in the Boot list. Press
  Enter. The boot order sequence is now changed to boot from the CD, DVD, or USB flash drive.
• Press F10 to save your changes and to
  exit the BIOS Setup Utility. Select Yes in the confirmation window. The PC will restart. Allow the PC to restart normally. The scan will take a few minutes and remove any malware that may be infecting your computer.
• Now, download Windows 10 from below link.https://www.microsoft.com/en-us/software-download/windows10
• From above link, navigate to option “Using media creation tool”->”Perform a clean installation using USB or DVD” and follow steps from
  step 3.

Note: Clean Installation will delete all your files and programs.

Method 2:
If you are using HP Pavilion Desktop.

If you are having spare keyboard, connect to your desktop and check if that works.

If the issue still persists, please contact the HP support for further assistance with the issue. Refer to below link to contact HP support.

https://support.hp.com/in-en/contac...n-One-Desktop-PC-series/5295901/model/5296771

Disclaimer:

• 
  Be careful when changing BIOS settings. The BIOS interface is designed for advanced users, and it's possible to change a setting that could prevent your computer from starting correctly.
  
• 
  Updating BIOS should only be done if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperable. Be sure
  to follow the manufacturer's instructions exactly.
  

Please get back to us, if you are still facing issue with Windows 10.

Thank you.

 

help with desktop beeping but not starting up.

i have a desktop pavilion and today stops working , when turning on just beeps 3 long beeps then 2 shorts.. before that it was just sending me to auto repair but never start up. now just beeps and screen is black.