Windows 10: My internet is like limited, it doesnt go up of 1 mb/s and i have 80 mbps and i am supossed...

can someone help me

:)

 

while doing 80+mbps windows shows no internet, thanks

sometimes my machine shows no internet and speed test shows 80+mbps. help please

 

My internet is like limited, it doesnt go up of 1 mb/s and i have 50 mbps and i am supossed to get 6 mbps i tested it

Hi Mayito. I'm Greg, an installation specialist, 10 year Windows MVP, and Volunteer Moderator here to help you.

Type Security in Search, open Security Center and turn back anything that is disabled as you are at severe risk without Defender and Firewall, and these are what works best with least issues in Windows 10.

I'll give you everything to go over your internet connection so that at least something will work. Even if you've tried some of these steps already please do them over in sequence to see if it makes as difference:

Update your network adapter drivers from the PC maker's Support Downloads web page using the full model number, HP Serial Number or Dell Service Tag on sticker. Compare the latest drivers available for download with the ones presently installed in Device Manager
reached by right clicking the Start Menu. Make sure you have the latest BIOS or UEFI firmware, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

If you have the latest network driver then try on it's Driver tab also to Roll Back, or Uninstall and then restart PC to reinstall the driver. Try also all older drivers from Update Driver > Browse > Let Me Pick list working backwards.

If this was caused by Windows Updates then you can check which were installed at Settings>Update & Security>Windows Update under Installed Updates, then uninstall them from the link there, and hide with the Hide Updates tool downloaded from here:

https://www.howtogeek.com/223864/how-to-uninsta...

You can also use System Restore to get before the problem began, then check for Updates with the Hide Update tool and hide them.

If this was caused by Version update then you can roll it back in Settings>Update & Security>Recovery and then hide it until it matures using the Hide Updates Tool.

For Wifi won't connect after Version 1903:

https://windows101tricks.com/fix-wifi-keeps-dis...

https://www.techrepublic.com/article/wi-fi-and-...

How to fix Wi-Fi problems on Windows 10 version 1903, May 2019 Update - Pureinfotech...

For Ethernet not working:

https://www.kapilarya.com/wifi-ethernet-doesnt-...

Go to Device Manager > Network Adapters, select network adapter in use, click on the Power Management tab, clear the check box to "Allow the computer to turn off the device to save energy." Then click on the Advanced tab, disable any energy-saving options.

Enable IPv6 in the network adapter settings:
https://www.tenforums.com/tutorials/90033-enabl...

Run the fixit from
https://support.microsoft.com/help/929852 (Re-enable IPv6 on all nontunnel interfaces) and reboot.

Right click the network icon in System Tray at bottom right end of task bar to Troubleshoot Problems. Choose trying to reach a specific website and put in a URL it won't open to trace the reason. Then run it over and choose your Network adapters to troubleshoot.

Try all of these steps:
https://support.microsoft.com/en-us/help/10741/...

https://www.thewindowsclub.com/windows-10-netwo...

Go to Settings > Network & Internet > WIfi > Manage Known Networks, highlight and remove the network having problems, restart PC to see if it shows up again.

Try plugging in by ethernet cable to the router to compare, then plug the ethernet cable into the modem (if separate) to see if this might be an issue with the router.

Try powering off modem, router and PC and then restarting in that order with 1 minute in between each. You may need to reset your router or even optimize it following these steps:

https://www.lifewire.com/resetting-a-home-netwo...

https://www.pcmag.com/article/258865/how-to-set...

Your router manual is always available from the manufacturer's website for your exact model.

You also are entitled to Support from your internet provider to get online on all devices. This is always included in the monthly bill. If your router is less than a year old they will also Support getting it connected and optimized.

Another option is you could replace the wireless adapter with an inexpensive USB nano adapter like this one:

https://www.amazon.com/OURLiNK-600Mbps-Wireless...

Let me know how the above work, including results of all steps and any other clues to help determine what to try next.

______________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly
research any product advertised on the sites before you decide to download and install it.

 

Limit bandwidth in Delivery Optimization

Hello,

I tried using Delivery Optimization Advanced Settings but could not see any effect on the download rate of Xbox Install queue.

For example If I set if to

[x] Absolute Bandwidth

[x] Limit background: 1 Mbps

[x] Limit foreground: 1 Mbps

It corresponds to about 4 MB/s during download

How does Microsoft interpret the units "Mbps" and "MB/s"?

Or to put it in other words. What value do I have to enter for the Limit, if I want to download with only 1 MB/s, meaning 1 million byte per second?