Windows 10: My laptop cant charge with usbc anymore

Hi, let me try to keep this short for you:I got a new power bank, Power bank had an error and caused a power surge on my laptop while trying it, I got a replacement, Laptop refuses to charge itself with usbc, No the port isn't damaged, it can charge other devices perfectly fine, Even fast charge my phone, it just doesn't charge itself, I've tried so many solutions but none of them work, And I need this laptop for my school work, Someone please help me!Thats pretty much the best I could shorten it.

:)

 

PQ1 usbc hub on my asus laptop has stopped working

now I need to charge laptop by removing pq1 hub connector which provides only access for usb and hdmi drives. I just installed three windows updates with restart, no benefit to problem. I just installed one suggested hardware fix, still no benefit to problem.

has Microsoft abandoned support for PQ1 USBC hubs? my laptop is only USBC so a working hub is imperative.

 

Toshiba Laptop Not Holding Battery Charge  

attached is a pic of the internal of the laptop there does NOT appear to be a CMOS battery what should my next steps be? - fully charge existing battery and see if i remove it and install back teh next day whether its still fully charged? - charge the battery for 18 hours to charge the internal CMOS battery? - suggestions please as Im not sure

 

Laptop no longer charging since Windows 10 update

If the laptop works without the battery then charger is functioning correctly. Take a cloth with a bit of rubbing alcohol on it (or some on-the-go alcohol swabs), and clean the metal contacts that connect your battery to your laptop.

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.