Windows 10: My laptop can't connect to particular WiFi

My laptop suddenly can't connect to home WiFi, the Wifi able to connect to other device and my laptop can connect to portable Wifi and other Wifi

:)

 

Cannot connect to wifi with laptop

Hi,

We would like to isolate this issue that you're having right now. We suggest that you try the steps below:

• 
  Go to Network and Sharing Center.
  
• 
  At the right pane, click Change adapter settings.
  
• 
  Right click on your connection name (WiFi name) and Properties.
  
• 
  Click the Configure... button.
  
• 
  Go to Power Management tab.
  
• 
  Uncheck/disable the radio button for "Allow this device to turn off this device to save power".
  
• 
  Restart the PC (Important)
  

We will wait for your response.

Regards.

 

Can't connect to a particular wifi network

laptop running Win 10 18362.

Wifi Adaptor: Ralink RT3290 802.11bgn

I have a newly installed internet connection with a new router. I can connect to the wifi using all my other devices but not the laptop, but I can connect to all other networks using this laptop.

The wifi just doesn't show up in the available networks GUI or on running the "netsh wlan show networks" command, but it shows up fine and connects to all other devices.

It connects when I use a lan cable.

It is not a range issue as the laptop can detect and connect to much weaker networks. For some reason won't detect this particular network. What to do?

 

laptop can't find wifi but connects with ethernet cable

Please try these troubleshooting steps that may help.

1. Make sure the router SSID broadcast is on.
   
2. Change the wifi channel to see if it resolves the problem.
   
3. Enter the SSID and WPA2 password manually and see if the laptop connects.
   
4. Temporarily turn off the encryption.
   
5. We go into device manager & check updates for wifi drivers, we may need to simply update the driver.
   
6. We go to Settings - Network & Internet - Status - Change Adapter Options, then right-clicked 'Ethernet' and disabled it. We do the same with wifi. Then we (with Ethernet still disabled) enabled wifi. It should re-connect to your wifi after a while.
   
7. We have to disconnect our Ethernet cable from our laptop and follow the steps:
   Start>Control Panel>Network and Sharing Center>Manage Wireless Networks and remove all wireless connections by right click on it and select Remove network from the drop down menu. After doing this, close the windows and scan for the wifi networks.
   Click on the available network and select connect. After a while, we will be asked to give a password for our wifi connection. Type the password and click on connect button. And now will be connected to our wifi network via wireless.
   
8. First is to disconnect the internet cable from the laptop then uninstall/reinstall the wifi adapter.
   Go to Device Manager and uninstall the wifi adapter.
   Once uninstalled, reboot the laptop and it should reinstall the driver automatically.
   After the reboot do try connecting to your wireless network again.
   If all these will not work, do also make sure that the wireless adapter is enabled. Depending the model of your laptop there should be key combinations on how to enable/disable it.