Windows 10: my laptop is stuck in boot loop and i try to get to the diagonostic through clicking F2 but...

My Lenovo laptop is stuck in boot loop and I try to get to the diagonostic through clicking F2 but for some reason there is a password to the diagnostics

:)

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.

 

Lenovo laptop is stuck in a restart loop after reinstalling window 11 after factory reset

Hello Nicholas,

I am so sorry for this inconvenience. There are a few ways to fix this issue which have been listed below.

1. Automatic Repair

Step 1. Boot the PC from the Windows installation CD and press the random key.

Step 2. Navigate to Repair your computer > Troubleshoot > Advanced options > Automatic Repair.

Step 3. Wait a while and follow the screen's instructions to fix the Lenovo laptop stuck in boot loop error.

2. Boot Sector Repair

Use Professional MBR Repair Tool

Step 1. Create a WinPE bootable disk

• Launch EaseUS Partition Master, and click "Bootable Media" on the toolbar. Select "Create bootable media".
  
• Click "Next" to finish the process
  

Step 2. Boot EaseUS Partition Master Bootable USB

• Connect the bootable USB or CD/DVD to your PC.
  
• Press F2 or Del when you restart the computer to enter the BIOS screen. Set and boot your computer from "Removable Devices" or "CD-ROM Drive". And then EaseUS Partition Master will run automatically.Press F2 or Del when you restart the computer to enter the BIOS screen. Set and boot your computer from "Removable Devices" or "CD-ROM Drive". And then EaseUS Partition Master will run automatically.
  

Step 3. Rebuild MBR

• Click "Toolkit" and choose "Rebuild MBR".
  
• Select the disk and the type of MBR. Then, click "Rebuild".
  
• After that, you can see "MBR has been successfully rebuilt on Disk X".
  

Let me know if this helps!

 

My laptop is stuck on a boot loop

My laptop is stuck on a reboot loop, but it only lasts a very short time, so I can’t try any of options by pressing f2/f10 as it switched off again, sometimes I get further, but it goes black again, any help?