Windows 10: My microsoft surface pro 9 keyboard does not work after constant troubleshooting attempts,...

Hello, A few months ago, my microsoft surface pro 9 keyboard did not work after numerous troubleshooting attempts and I am currently using a temporary bluetooth keyboard. We are getting a new surface pro keyboard and I wanted to ask will it work the same?

:)

 

MS Surface Keyboard Cover not recognized by MS Surface Pro 3

My Surface Pro 3 cover mysteriously stopped working (other USB keyboards work).

I’ve exhausted all of the steps from the Internet and am hoping for some advice here on what to try next.

• Clean the metal pins on both the keyboard and the Surface Pro 3 with alcohol swap and q-tip.
  
• Performed the standard two button shutdown procedure - Force a shutdown and restart your Surface - Microsoft Support
  
• Update "HID keyboard" device in Device Manager.
  
• Uninstall and reinstall "HID keyboard device" in Device Manager.
  
• Removed HID keyboard device in Device Driver and manually installed Surface Type Cover device (which later automatically turns to "HID keyboard device" when you hit "update drivers")
  
• Updated all Windows 10 patches to date.
  
• Tried a brand new keyboard (Microsoft FMM-00001 Type Cover for Surface Pro https://www.amazon.com/gp/product/B073W4MPJF/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 )
  
• Updated firmware for Surface Pro 3 (typed in “winver”, took that Windows version, then downloaded the specific patch required here - Download Surface Pro 3 from Official Microsoft Download Center)
  
• Reset Surface Pro 3 while keeping personal files
  
• Reset Surface Pro 3 and deleted all personal files
  
• Performed hardware tests on aka.ms/surfacerepair (nothing bad found; all looks ok)
  
• Drained the battery most of the way before connecting again - the two times it worked momentarily these last few days was when I connected my new type cover keyboard to the Surface Pro 3 after the battery had died down to below 50%; a simple reboot later, everything stopped working. This user seems to have the same problem with it working briefly when there is low battery - https://answers.microsoft.com/en-us...pe-cover/52f983c6-2e53-49fa-aac6-7c4cc5d25d9f )
  

A breakdown of the steps I've done to sometimes get it working

• Leave Surface Pro 3 on about 2 hours on battery only.
  
• Power on Surface Pro 3.
  
• Working Keyboard.
  
• Turn off Surface Pro 3 (or reboot)
  
• Keyboard not working anymore
  
• Another similar user here - https://answers.microsoft.com/en-us...er-issue/2d6ed60a-c892-4ed9-907f-846fd9496f5a
  

Can anyone recommend any other troubleshooting steps? One of these steps seemed to work ok for others having this same problem.

 

My Microsoft surface pro 9 keyboard isn't working after an recent update was installed. I have warranty through Microsoft. Is it possible for me to get a new keyboard?

Hi Romalyn,

Welcome to Microsoft Community.

I'm Hahn and I'm here to help you with your concern.

I'm sorry to hear about the trouble you're experiencing with your Surface Pro 9 keyboard. Before considering a replacement, there are a few troubleshooting steps you can try that have helped others with similar issues:

- Force a shutdown and restart your Surface: Force a shutdown and restart your Surface - Microsoft Support

- Disconnect and reconnect the keyboard. Disconnect the cover. This causes Windows to re-identify the device in Device Manager, which can fix certain issues.

- Confirm connectivity: Press the Caps and Fn keys on your Surface Type Cover or Keyboard several times to check whether the LED lights turn on.

1. If the LED lights turn on, your problem may be with Windows and not the device itself. The next step is to reset your Surface. Here's how: Restore or reset Surface for Windows - Microsoft Support
   
2. LED’s do not turn on: Verify if keyboard functions in UEFI: How to use Surface UEFI - Microsoft Support
   

If the keys are working correctly in UEFI, but not in Windows: The problem may be with Windows and not the device itself. The next step is to reset your Surface.

If the keys are still not working correctly even in UEFI: If the Type Cover or Keyboard still doesn’t work on your Surface, submit a service order for your Type Cover or Keyboard.

I hope this helps. If there is anything not clear, please do not hesitate to let me know.



Your Sincerely

Hahn. W - MSFT | Microsoft Community Support Specialist

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?