Windows 10: My Microsoft surface pro 9 keyboard isn't working after an recent update was installed. I...

I updated my surface pro 9 yesterday because it said it needed go be updated then a couple hours later my keyboard stops working all in all.

:)

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

MS Surface Keyboard Cover not recognized by MS Surface Pro 3

My Surface Pro 3 cover mysteriously stopped working (other USB keyboards work).

I’ve exhausted all of the steps from the Internet and am hoping for some advice here on what to try next.

• Clean the metal pins on both the keyboard and the Surface Pro 3 with alcohol swap and q-tip.
  
• Performed the standard two button shutdown procedure - Force a shutdown and restart your Surface - Microsoft Support
  
• Update "HID keyboard" device in Device Manager.
  
• Uninstall and reinstall "HID keyboard device" in Device Manager.
  
• Removed HID keyboard device in Device Driver and manually installed Surface Type Cover device (which later automatically turns to "HID keyboard device" when you hit "update drivers")
  
• Updated all Windows 10 patches to date.
  
• Tried a brand new keyboard (Microsoft FMM-00001 Type Cover for Surface Pro https://www.amazon.com/gp/product/B073W4MPJF/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 )
  
• Updated firmware for Surface Pro 3 (typed in “winver”, took that Windows version, then downloaded the specific patch required here - Download Surface Pro 3 from Official Microsoft Download Center)
  
• Reset Surface Pro 3 while keeping personal files
  
• Reset Surface Pro 3 and deleted all personal files
  
• Performed hardware tests on aka.ms/surfacerepair (nothing bad found; all looks ok)
  
• Drained the battery most of the way before connecting again - the two times it worked momentarily these last few days was when I connected my new type cover keyboard to the Surface Pro 3 after the battery had died down to below 50%; a simple reboot later, everything stopped working. This user seems to have the same problem with it working briefly when there is low battery - https://answers.microsoft.com/en-us...pe-cover/52f983c6-2e53-49fa-aac6-7c4cc5d25d9f )
  

A breakdown of the steps I've done to sometimes get it working

• Leave Surface Pro 3 on about 2 hours on battery only.
  
• Power on Surface Pro 3.
  
• Working Keyboard.
  
• Turn off Surface Pro 3 (or reboot)
  
• Keyboard not working anymore
  
• Another similar user here - https://answers.microsoft.com/en-us...er-issue/2d6ed60a-c892-4ed9-907f-846fd9496f5a
  

Can anyone recommend any other troubleshooting steps? One of these steps seemed to work ok for others having this same problem.

 

Problem updating Windows Surface Pro 4 with Windows 10 feature updates

Hi,

I have manage to install image for Microsoft Surface Pro 4 by going to https://support.microsoft.com/en-us/...erecoveryimage and download a recovery image for Microsoft Surface Pro 4.

What I did to reset your Surface from a USB recovery drive was:
Step 1: Make sure your Surface is turned off and plugged in (hold down the power
button for 30 seconds).
Step 2: Insert the USB recovery drive into the USB port on your Surface.
Step 3: Press and hold the volume-down button while you press and release the
power button on your Surface.
Step 4: When the Surface logo appears, release the volume button.
Step 5: When prompted, select the language and keyboard layout you want.
Step 6: Select Troubleshoot > Reset your PC.
If prompted for a recovery key, select Skip this drive at the bottom of the
screen.
Step 7: Select the target operating system you wish to reset. This
refers to the current operating system installed on your Surface.
Step 8: Select Yes, repartition the drives, and on the next page, select Next.
Step 9: Choose Just remove my files.
Step 10: Select Reset.
Surface restarts and the Surface logo displays while the reset process continues
(this can take a while).

This always fails and I have to do the below which continues installation.
Windows 10 Installation Media:

1. Insert the Media (DVD/USB) in your PC and restart.
2. Boot from the media.
3. Select Repair Your Computer.

Select Troubleshoot.

1. Choose Command Prompt from the menu:

Type in the command:
Diskpart
Type in the command:
List disk (Note which disk is your Boot drive number mine is 0)
Type in the command:
Sel disk 0
Type in the command:
List vol (Note which volume is the EFI partition mine is 4)
Type in the command:
Sel vol 4
Type in the command:
assign letter=V:
Type in the command:
Exit
Type in the command:
V:
After you have assigned a drive letter Using Diskpart You can format the EFI partition:
Example: if you assigned a letter V to the partition the command would be:
format V: /FS:FAT32
Type in the command:
bcdboot C:\windows /s V: /f UEFI


Now I have an issue that I cannot install Feature Updates. They keep failing to install.
Any ideas how to resolve issue?