Windows 10: My monitor is receiving no signal.

I’ve used this monitor on a previous device and it was working great. Now that I got a new laptop, I plugged in everything the way I did before. The hdmi cable works perfect, as I have checked on a different device, and the port on my laptop also works. I’m thinking it’s an issue with my laptop but I’m not sure, the display adapter or drivers is updated. Please give me advice so I can fix this problem!

:)

 

Monitor not receiving signal from pc after using hdmi passthrough

Hi,

Thank you for writing to Microsoft Community Forums.

HDMI Pass-Through does not work with all devices. Before attempting to set up an HDMI Pass-Through connection, you should make sure the source of the signal such as a Blu-ray player or Set Top Box, supports HDMI Pass-Through.

In order to get clarity on this issue and assist you with appropriate troubleshooting steps, please reply with the answers to the questions below.

1. Did you try a different HDMI cable to connect your PC to the monitor?
2. When you say "my pc will not display to my monitor", are you able to see any error message on it? For example: 'No signal'.

Meanwhile, try the below suggestions and check if this helps.

• If your monitor has an option in the Menu Button to switch the
  Input Source to HDMI Port, I would suggest you to try it.
• Try completely disconnecting your Xbox from the computer and just connect your computer to the monitor and check if you are able to see the display on the monitor.
• Make sure your display is plugged in and turned on.
• Unplug the video cable from both your display and PC, and then reconnect them firmly. After you reconnect the video cable, try moving your mouse on your display.
• Try connecting to different video outputs on your PC. Sometimes a change in driver can cause the video to be sent to a different display adapter or output.
• If you have your own display adapter installed and connected to your display,
  try connecting your display to the built-in video on the motherboard.
• Check for damaged HDMI cable, loose connections, or faulty adapters.

Hope it helps.

We're looking forward to your response.

 

Windows 10 Update Installed & Now No Signal to Monitor

Hi,

For us to isolate your concern with your monitor's signal, we would like to know the following:

• When you say "signal", are you referring to the Internet?
• Are you getting any error messages? If yes, what is the exact error message?
• To make sure that we have not missed on anything, what troubleshooting steps have you done so far?

We look forward to your response.

 

PC boots up but monitor shows 'no signal' and keyboard not working.

'No signal' means that your monitor is not receiving a video signal that it can display. This is usually due to one of the following causes:

1- The cable going from your computer to your monitor is loose. Power off the monitor, re-attach the cable at both end, power on your monitor. (This step is N/A if you have a laptop or an AIO.)

2- The signal your graphics card is sending to your monitor can't be displayed by your monitor. Boot the computer to Safe Mode, choose a low resolution signal, restart your computer normally, switch to the 'Recommended' resolution for your monitor.

To change the signal resolution: Start > Settings > System > Display > Display resolution.

Your problem is not related to your BIOS, unless you made changes to the BIOS yourself.