Windows 10: My Old HPTouchsmart 300 Running Windows 7, has stopped signing into One Drive? There is no...

My Old HPTouchsmart 300 Running Windows 7, has stopped signing into One Drive? There is no access it just constantly say 'Signing in'"

:)

 

Windows 7 Professional keeps dropping the DVD/CD drive

Working with a fresh install (2nd attempt) of Windows 7 Professional on new hardware. The motherboard is a Gigabyte EP45-UD3P. Running 4G of RAM and an Intel Q9400 Quad Core CPU. The DVD/CD optical drive is a Pioneer DVR-218L.

Here's the problem - after two fresh installs, Windows 7 drops the DVD/CD drive and I get the following error in Device Manager (The device cannot start {code 10}). After the install, the drive works for a period of time, then stops working and I get the error code.

The driver appears to be a standard Windows driver (CD-ROM driver).

I've tried uninstalling the drive and re-installing it in Device Manager but it does not work - I continue to get the device error.

I've also swapped out the DVD/CD drive to insure it's not a bad unit. Same problem with both drives.

What do you suggest for next steps?? Could it be an issue with the motherboard?? A driver problem?

I visited the Pioneer web site - could not find any help or additional Windows 7 drivers.

What now??

 

How to stop File History on the old drive and start File History on a new drive?

I use the external drive
for File History and have a lot of information there. I want to restart the File History process on a new drive and place the previous File History drive off-site.

Please suggest the steps to stop File History on the old drive and start File History on a new drive.

 

Windows 7 booting off wrong drive?!?!?

Please move if this is in the wrong place.

I have two hard drives, a 1.5TB drive, and a 160GB drive. Windows is installed on the 1.5TB drive, as are all my files and programs. The 160GB drive has a bunch of old files, and apparently the bootmgr and boot folder. Nothing else is on the 160GB drive, other than media files etc.

If I remove the 160GB drive from the machine, windows refuses to boot, plug it back in, it works fine. The setup with two hard drives I have now is temporary, as the 160GB drive will go into another machine.

My question is, can someone give me a step by step on how to make windows force to boot off the 1.5TB drive, ignoring the 160GB drive in the boot process completely?
I don't know how to do this in Windows 7, on XP I would just run the /fixmbr command and its related ones.

Any help would be appreciated.

Note: I would really really rather not have to wipe and reinstall, I know it can be done without one as I've had this issue with XP before.