Windows 10: My Panasonic TV won't connect to my computer

Hello I have a problem connecting my panasonic Tv to my computer, my computer is a windows 10 and has 1 hdmi connection and 1 display port connection, my Panasonic TV is a TC-L32XM6H and has no display port connection, luckily, I managed to find a cable with display port entrance and hdmi exit, I connected the Pc to the TV and the computer doesn't detect the TV, so what do i do?

:)

 

Laptopc can´t connect to TV

Hi,

Please reply to the questions mentioned below in order to assist you in a better way.

• Are you connecting the PC and TV using a HDMI cable?
• Did you make any changes prior to the issue?

I suggest you to try the steps below and check if it helps.

• First you need a video cable for making the physically connection. For better picture quality, you should connect the computer to the TV using standard VGA ports or via the DVI to HDMI cable provided your TV supports these ports.
• Open the "display settings" in your computer and activate output to the TV screen. You can either mirror content of your computer on the TV or extend the display just like a dual monitor screen.
• Pick up your TV remote and switch to "External Inputs" from the menu. You will need to change the default "Video 1" to a different selection which may be "HDMI 1" or "Video 2" depending on how you have made the connection.

Important: Make sure you connect the cable to the TV before turning on the computer as sometimes it may fail to recognize external display.

You may also need to change the screen resolution of your TV using the Display settings in your Control Panel else the picture may appear distorted.

Please revert if you face any issues with PC not connecting to TV.

 

Connecting an Older Model Panasonic Viera Large Screen Tv to My Windows 10 PC

Greetings; and thanks for the quick reply:

I have no other TV with which to carry out the tests you've mentioned but I do have another computer monitor that I can carry out a similar test with. At the very least it may indicate if the problem is on the computer side of this equation or the monitor
side.

In your suggestion, you've laid out some fairly clear instructions. I'm going to give them a try with the monitor I eluded to. Do these steps need to be followed with the Monitor or TV connected or am I just testing the function of my computer only at
this time?

I ask this because when I was using my Mac computer to try to connect so it displayed on the same Large Screen Panasonic TV, I had the very same problem; except that the Mac computer actually did recognize that the Panasonic TV was connected. It's just
that it would not display. This is why I wondered if I needed to figure out the correct settings on the TV itself.

At any rate, I'll give it a try and get back to you with the results. (if any) Thanks again for the quick reply.

Tim M.

 

device driver for panasonic tv deleted

Hi Wungraileng,

Thanks so much for your response. I ran the trouble shooting option and scanned for new hardware devices but the Panasonic TV is still not listed as an audio device the way it was before I accidently deleted it. (It is listed as a monitor but not as an audio
output). I was trying to get the sound on the computer to output to the TV with HDMI when I accidently deleted the TV from the audio devices.

Thanks.