Windows 10: My pavilion gaming desktop not working

I recently updated BIOS on my Pavilion Gaming Desktop then it turned off and didn’t work please help me my cousin told me that the motherboard was broken so I don’t know please help

:)

 

My Pavilion Gaming Desktop isn’t working.

I was using my Pavilion Gaming Desktop I updated BIOS the my pc didn’t display on monitor and keyboard and mouse didn’t work.I removed the Graphics Card I cleaned then put it back on my pc and it didn’t, I removed the RAM Stick I cleaned it then put it back on my pc and still didn’t then I removed the CMOS Battery for 60s put it back on and still no display

 

Unable to boot into the Desktop on HP Pavilion 20-b014

Hi Tophy,

Thank you for performing the troubleshooting steps to resolve the issue from your end.

I apologize for the inconvenience caused to you, I realize this may be frustrating.

This issue might occur, if there is an issue with hardware and drivers.

Before proceeding further, I would like to ask few questions:

• 
  Are you referring to HP Pavilion Laptop or Desktop?
  
• 
  Did you try reaching BIOS using external keyboard (if you are using Laptop)?
  

Please follow below mentioned methods to resolve the issue:

Method 1:
If you are using HP Pavilion
Laptop.

Please Connect to External keyboard and try below mentioned steps:

• Restart Laptop and click any function keys
  Like F2, F10, ESC, or DEL key to begin the BIOS Setup.
  
• Look for a tab in the BIOS Setup Utility that is labeled
  Boot Order, Boot Options, or Boot. Following the directions on the screen, use the arrow keys to go to the
  Boot Order, then press Enter.
• Locate the CD, DVD, or USB flash drive (this might be called Removable Device) in the Boot list. Following the directions on the screen, use the arrow keys to move the drive up so that it appears first in the Boot list. Press
  Enter. The boot order sequence is now changed to boot from the CD, DVD, or USB flash drive.
• Press F10 to save your changes and to
  exit the BIOS Setup Utility. Select Yes in the confirmation window. The PC will restart. Allow the PC to restart normally. The scan will take a few minutes and remove any malware that may be infecting your computer.
• Now, download Windows 10 from below link.https://www.microsoft.com/en-us/software-download/windows10
• From above link, navigate to option “Using media creation tool”->”Perform a clean installation using USB or DVD” and follow steps from
  step 3.

Note: Clean Installation will delete all your files and programs.

Method 2:
If you are using HP Pavilion Desktop.

If you are having spare keyboard, connect to your desktop and check if that works.

If the issue still persists, please contact the HP support for further assistance with the issue. Refer to below link to contact HP support.

https://support.hp.com/in-en/contac...n-One-Desktop-PC-series/5295901/model/5296771

Disclaimer:

• 
  Be careful when changing BIOS settings. The BIOS interface is designed for advanced users, and it's possible to change a setting that could prevent your computer from starting correctly.
  
• 
  Updating BIOS should only be done if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperable. Be sure
  to follow the manufacturer's instructions exactly.
  

Please get back to us, if you are still facing issue with Windows 10.

Thank you.

 

Desktop PC Work: HP Pavilion p6203w

These are the files that I am seeing. It will not let me extract the files.