Windows 10: My pc All of sudden stopped giving display output

Specs- Ryzen 3 2200g CPU RAM- Corsair vengeance LPX 8*2 3200 3000Aeorus Elite b450 ATX Motherboard Boot drive - m.2 nvme crucial p2 500gb GPU - Asus Strix RX570 4GB OCPSU- Corsair VS 450Windows 10 OS.So the problem is i haven't touched the bios or any other settings, yesterday when i turned my pc on it just stopped giving display output... I have tried everything and only once i was able to get a display from the mobo output of hdmi and it went straight blue screen after that couldn't even get that. The pc is booting into windows as i was abe to access it through Remote Desktop where the pc

:)

 

Display langage reverted back


I followed the suggested actions: everything OK from step 1. and I attach as requested the output for step 2.



for convenience I attach the google translation



I'm ready to act following suggestions (if any) before...going through the restore (please don't misunderstand, I'm not looking forward doing it).

I appreciate in any case your help

 

Freeze on early display win 10

Hi Roger,

Welcome to Microsoft Community.

- What is the make and model of your PC?

- Do you receive any error message?

I suggest you to follow the below steps and check if it helps:

If you see the black screen or have a flickering screen follow the steps given below:

• Try connecting to different video outputs on the PC. Sometimes a change in driver can cause the video to be sent:
  

• To a different Adapter: from integrated graphics to a discrete card or vice versa.
  
• To a different output: from HDMI to DVI, DisplayPort to VGA, or any other combination.
  

• Try to boot into Safe Mode with Networking or Enable low-resolution video.

• Advanced boot options, Safe　Mode with Networking, or Low Resolution Video
• Check Device Manager and look　for Display Adapters

• If you see 2 items under Display Adapters, disable to integrated video card (e.g. Intel HD 4000 or AMD Radeon HD 4200) and restart. (try vice versa if it does not work) 　　
  
• If you see 1item under Display Adapters, rollback the driver or uninstall the display　adapter in Device Manager, and enable the option to delete driver software.
  

Check the PC or display adapter manufacturer’s site for an updated driver.

Hope the information helps, if you have any further queries, feel free to post. We are here to assist you.

Regards,

Guru Kiran

 

No Display Output From PC

I'v got a PC setup with a 7950GT and a P5N32-SLi SE Deluxe, however I've plugged a monitor into it and I get no display output whatsoever. The monitor just enters into power-save mode after about 5 seconds and I really have no idea why. I'm gonna try different cards tomorrow but this card worked perfectly when I took it from another PC... so I don't understand what could be wrong.

The ocomputer powers on fine when I switch on the PSu, but it doesn't have a power switch for the actual PC as of yet... and for some reason it won't turn on or off when I use a screw driver to touch the power pins or reset pins on the motherboard. I have to physically use the switch on the PSU to turn it on and off.

Any suggestions as to what this may be? Also what is the bare minimum a PC will boot up with just so I can test whether it will display an image to rule out any other hardware faults. Unfortunately there's no onboard graphics so I need some kind of GPU plugged in to test it, and the only thing I have to hand is the 7950GT...

Please help, as it's really important I get this computer working as I'm doing it as a favour for somebody else and I'd feel awful to get their hopes up and then have it not work *Frown

Thank you