Windows 10: My PC boots up but the monitor shows no display.

My PC boots up but the monitor shows no display. The main problem is that the issue is intermittent. I have checked the monitor and display cable and they are fine. I removed my MSI 1050Ti but the issue persists.Motherboard : Gigabyte H110MS2CPU: Pentium G4560RAM: Corsair Vengeance 8 GB 2400 MHzOS: Windows 11 Pro which I installed forcefully without TPM

:)

 

PC boots up but monitor shows 'no signal' and keyboard not working.

My W10 PC boots up, fan spins, HDD spins but there is no output to monitor, which shows 'no signal' and the keyboard does not light up. I have tried all the suggested diagnostics such as unplug power, take out the CMOS battery, re-seat the RAM, clean RAM etc but nothing. It did come back on a few weeks ago for a few days then reverted to display showing 'no signal'. Any suggestions how to get this PC to display and work again are welcome.

Many posts i have read suggest entering BIOS etc or settings - i cannot do this as no display!

Please suggest fixes for my situation as above.

Thanks

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

No display on monitor when TV set as primary display

Issue solved

Removed DVI/HDMI cable from computer and monitor

Step 1: Check if the VGA monitor cable is defective.

1. Turn off computer
   
2. Connect the monitor VGA cable from the monitor to the VGA port on the computer
   
3. Turn on computer, VGA monitor cable is good.
   
   Step 2: Tun off computer
   

1. Connect HDMI Cable to HDMI port and TV
   
2. Turn on computer and TV, there is no monitor black screen
   
3. Click on the Windows logo, select the Settings icon , and then select
   
   System. Under Display there are two squares, labeled 1 and 2
   
   D Click on Advanced Display Settings:
   
   Display information: Display 1- Monitor Display 2 -TV
   
   E Right-click the Speakers icon in
   the taskbar, select Sound, click on Playback devices,
   
   
   a s tv screen with my brand shows
   AMD High Definition Audio Device ready.
   
   F. Problem solved
   
   
   
   Cause of the problem: Defective VGA port on the Syba VGA HD15+ 3.5 Audio to HDMI converter