Windows 10: My PC deadlocks even after doing Factory defaults

Recently my whole PC freezes for no reason and at a random time, It happens once or twice per day. My PC It's not overheating, has no viruses and It doesn't have dust inside. This freezes are instantly, the screen stays the same but nothing works keyboard, mouse... basically a total freeze, what I can do only is to shutdown my PC from the tower button, EDIT: I tried changing the Hard Disk and restored defaults and reinstalling Windows 11 and completely nothing.Graphic drivers were unistalled and reinstalled, i also tried lower driver versions and nothingUpdated the BIOS, the controllers, tr

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

PC constant deadlocking

Hello, i have a problem with my pc. The pc randomly deadlocks and i cant do anything except turning it off and back on, it even deadlocked when i was resetting my windows, in safe mode and when booting up the pc it deadlocks. the only time that it doesnt
deadlock in is in the bios menu.

i tried the following to fix; none worked

checked the temps, they were fine

reinstalled windows and wiped my drives empty

startup repair

chkdsk command

windows memory diagnostics

resetting bios

running the pc with one stick of ram (i tried both sticks, no difference)

the pc can literally deadlock at any given time, without any stress being put on the pc, so no programs running no nothing just a random deadlock

and im thinking its definitely a hardware problem, the thing i want to know is what faulty hardware can cause this.

my psu fans spin normally, no strange sounds

my cpu fan doesnt make weird noises so its fine

the other options are the mobo, ssd i have windows on, the ram and my apu

these are my specs:

B450M S2H

Ryzen 3 2200G APU with vega 8 integrated

120gb ssd

coolermaster masterwatt lite 400w

2x4gb 3000mhz ram

someone pls help im getting frustrated

 

SURFACE PRO 3 RESET TO FACTORY DEFAULTS PROBLEM

The camera caused a system freeze every time it was activated so I thought why not restore.

• I attempted to reset my Surface Pro 3 to Factory defaults.
• The Surface Pro made it to 1% then crashed.
• Now it is in a reboot loop.

I have tried several times and now it gives an "Unable to reset your PC. A required drive partition is missing" error.

Do you have any suggestions on how to make it work again?