Windows 10: My PC experienced a bluescreen, Can anyone help me with the minidump files?

I turned my PC on this morning and left it at the login screen, I came back after 30ish mins and pressed the keyboard, The PC went straight to a blue-screen with the errorStop code: SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDWhat failed: dxgkrnl.sysI waited a few for it to restart but it was stuck at 0%. After 5mins I restarted the PC it restarted fine without error, I first restarted it again and went into the BIOS i had recently enabled XMP so i disabled that, around the time of enabling XMP I also re-installed the other of my 16gb ram-sticks to make my full 32gb. I don't remember why I had removed

:)

 

pc bluescreening and i want to have minidump files reviewed

my pc has bluescreened twice in the past day and i have 2 minidump files, i was wondering if there was a way i could submit them for review to help me understand why my pc is bluescreening.

 

Minidumps not generated after a bluescreen in Win8.1

Lenovo Flex 2-14, windows 8.1 64bit, 4GB RAM, 8SSD-500HDD. All software setup from factory.

The laptop freezes randomly without any pattern and BSOD.

The bluescreen says kernel_data_inpage_error and collecting more info is stuck at 0%. It never progresses and I have to hard power down the laptop. After reboot, there are no minidumps generated(minidump is enabled in adv. settings). Sometime the BSOD also gives another additional info in braces (ntoskernal.sys, volmgr.sys, and few other). occurs at least once every one/two day. Any reason why Minidump is not generated?

Sometimes the laptop also restarts for no reason and shows up the windows boot manager which does not lists the HDD. Is it that HDD is not detected and is it related to the above problem?

The HDD is GPT partioned with UEFI boot enabled. After a lot of factory resets, and even after upgrading to win10, had the BSOD issues.

Someone suggested to change the boot option to legacy. Now I have factory image restored (win8.1) in GPT HDD with leagcy first boot option. I have used the the laptop for a couple of days and the BSOD did not occur till now. Is this a right solution?

Is this a hardware problem because This BSOD occurred in the middle of HDD partitioning after rebooting in AOEMI partition assistant and once while upgrading to win10.(loose cable maybe, but its a brand new laptop and the issue occurred even before putting on any new software) or caused by the boot options?

 

Please Help analyze MiniDump Files (included)/BSODs/ ntoskrnl.exe/

Hi,

In most cases, this problem is caused by corrupted system files. For us to provide the best resolution possible, we'll be needing additional information:

• Have you made any recent changes on your computer prior to the issue?
• Was there an error code displayed when experiencing the blue screen error?

Meanwhile, we suggest following the troubleshooting steps provided on this
article to help fix the blue screen error. We also recommend posting on
TechNet forum to analyze the dump files.

If you need further assistance, don't hesitate to reach out.