Windows 10: My PC shuts down before even going to the screen

I've removed all components from my PC to clean everything up just cpu, psi and gpu dust. I've plugged everything inside the same components and when I tried to run it it runs for 1s and then shuts down and repeats it. I know my components aren't the issue since before they worked. I had issue like this before but it was a long time ago and I forgot what I did.

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Laptop loads to Windows 10 logo then blue screen and shuts off

shadowthefire,

What brand/model laptop is this?

Try the following:

Step 1: Make sure the computer is shut down, and press the Power Button to turn the computer on.

Step 2: As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off again.

Step 3: Repeat this process 2 or 3 times until you see the following on the screen: Preparing Automatic Repair
Let the computer boot to the Automatic Repair screen.

Step 4: The next screen (blue) goes to: Choose Account to continue
Select your account, enter your Password, and press: Continue

Step 5: A Diagnosing your PC screen appears, and it takes you to the screen for: Automatic Repair

Step 6: Here you can click Restart, or, Advanced Options
Step 6.1: Select: Restart

Allow the computer to go through the routine, and see if it solves the issue.

If the problem still exists, go back to Step 1 through Step 6.

Step 6.2: This time, click: Advanced Options

Step 7: In the Choose an Option screen, select: Troubleshoot

Step 8: At the next screen, select: Advanced Options

Step 9: Last, select: Startup Repair (Used for problems that keep Windows 10 from loading)

Please provide an update.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds