Windows 10: My pc stuck while it was resseting

I was trying to reset my pc because of the problem of updating windows and when i tried to update it it just suddenly stuck and when i shut it down it bring up star up setting and i tried to reset the pc after all because i could not fix it i tried so many wayand none of them work and now it just stuck in the middle of resseting what should i do now ...

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

Stuck on Bios- custom PC - quick re-build ques

There is an updated UEFI Bios for this motherboard... but it's still listed as Beta and requires a complete clearout of the the previous Bios.

As the OP is still on "Small Steps" I think it would be prudent to let this pass... *Wink

- - - Updated - - -

Use USB 1.1/2.0 port

 

Stuck in Windows 10 Upgrade

My computer seems to be stuck in a Windows 10 failed upgrade loop. I was running fine on a beta version of Windows 10, and then I came downstairs one morning to see it repeatedly booting, attempting to repair, then rebooting. The steps I've taken to diagnose are:

• Attempting to boot off a USB drive (with all drives disabled in BIOS) - this fails at the point of the blue windows screen
  
• Attempting to boot the machine itself and getting into "repair/safe mode" using F7
  
• Looking at the BIOS for obvious failures (e.g. RAM that should be there is missing) - nothing obvious is wrong.
  

I am fairly certain the build version was 9926. For many months, the system would attempt to upgrade, and then say "it failed" for some reason and roll back.

Suggestions for next steps?