Windows 10: My PC was not recognized by software

I turned on my fairly new W11 PC and it recognized me by face, but all other normally automatic logins from FB to Google to Chrome and others needed to be logged into manually again and the PC was not recognized. What happened?

:)

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Zune / PC not recognizing Samsung Focus after Mango update

You may have a driver issue .

Have you tried using a different USB port and another USB cable?

I would suggest that you to try out the solutions found here if you are getting a connection error:

Xbox Support

Did you look in device manager and is your phone recognized?

You can check to see if the device has a driver issue by going to Device Manager and looking under

Portable devices - your Windows Phone device should be listed if it is listed as unidentified device, remove it and search for new hardware. It should find the device and if the drivers don't install try running the Zune desktop client which may
help install the drivers.

Have you tried installing the driver manually?

There is a KB here: Xbox Support ,here are step by steps to manually install the driver:

• Open the Zune software
• Go into to Device Manager.
• Right click the Unknown Device - your Samsung Focus.
• Click Update Driver
• Click Browse my computer for driver software
• Click Let me pick from a list of device drivers on my computer
• Click Next
• Click Microsoft in the left column list
• Click Windows Phone 7 in the right column list
• Finish the wizard. The Zune software should now recognize your device

Hope this helps.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??