Windows 10: my pc when i press my power button my pc case and my pc boot, my Monitor is black not start...

my pc when i press my power button my pc case and my pc boot, my Monitor is black not start or restart, just black screen. My pc spec: ASUS TUF F15 FX 507ZM

:)

 

Windows 10 PC - when power button pressed, pc starts but monitor is black completely

I have a 5-6 year old Windows 10 PC that suddenly shows a black screen. I have just recently installed Windows 10 on a new SSD, and am trying to go back to the HDD to copy the data over, but when I restarted, it doesn’t show anything. Basically, when I press the power button, the PC starts running with fans and all, but nothing on the monitor displays.

• I have tried leaving the PC on for around 2 hours, nothing changes
  
• I disconnected the power cord and quickly turn it back on, nothing changes
  
• I reconnected all the cables and checked if any may be loose, pushed them in, nothing changes
  
• I tried clearing the CMOS, nothing changes unless I did it wrong
  
• I tried every SATA port for both the HDD and the SSD, nothing changes
  
• I held Windows + B and Windows + V for around 5 minutes each, nothing changes
  

The PC automatically restarts every 20 seconds or so. Every fan is on at max power (I think).

I also created a Windows 10 installation tool on a USB, and the PC doesn’t seem to be reading it.

I have a HP Pavilion h8-1360t PC and a XFX Radeon RX 480 graphics card. Any help is appreciated and reply if I need to add extra information. Thanks.

 

My pc won't boot or restart just black screen

Please help, few day ago, my pc when i press my power button my pc case and my pc boot, my Monitor is black not start or restart, just black screen. My pc spec: Amd ryzen 3 vega 8 2200g, Monitor: Samsung t2735f.

 

Black screen when powering on PC. Fixed by removing power plug, plugging back

I have a weird problem with my desktop PC. Sometimes (not all the time), after I power up the PC, the display shows a black screen. Nothing shows up. The PC was powered on successfully as I can see the LEDs light up on the casing. To fix this problem, I pressed and hold the power button to shut down the PC first, then removed the power plug. Wait for a pop sound, then plug back the power plug. After doing these steps, the PC boots up normally and the monitor shows the BIOS boot up screen.

I am running Windows 10.

PC configuration:
- AMD Ryzen 7 2700x
- Nvidia GT 710
- Motherboard B450 Aorus pro Wifi
- DDR4 RAM 16Gbyte 2133Mhz clock
- SSD 1 Terabyte