Windows 10: My PC Windows 10 does not recognize my old floppy disk drive A

My PC Windows 10 does not recognize my old floppy disk drive AHow to open drive A and how to read the Word file on it

:)

 

does windows 10 recognize a 5.25 inch floppy drive

I need to take date from an old pc that uses 5.25 inch floppy disc. Will windows 10 recognize a 5.25 in floppy disk drive?

 

Floppy disk drive driver

Greetings,

I appreciate your swift response, if the above steps did not work no worries since this is an open forum , we can ask assistance from other community volunteers with their feedback and suggestion with this issue.

For the meantime you can try to check on this thread by @Gary_816

https://answers.microsoft.com/en-us/windows/for...

After 6 hours this worked for me. I have the Teac drive also and it appeared to install correctly, but did not show up in Windows Explorer. During a boot up the drive clicks and spins like 3.5" drives did on older systems if there is diskette in the drive.
I opened "Devices and Printers" in the Control Panel and the drive was there. With the diskette still inserted, right click on the Teac icon and select "Browse files > Floppy Disk Drive (A". File Explorer should open up and you will see the files on the
floppy listed. You will now see "Floppy Disk Drive (A" listed under "This PC". Right click on "Floppy Disk Drive (A" and select "Pin to Quick access". "Floppy Disk Drive (A" should appear under "Quick access". Although "Floppy Disk Drive (A" will disappear
from "This PC" after you close and reopen File Explorer, it will remain under "Quick access" and you can access it from there. It appears that W10 now thinks there is an internal drive "(A" because if you right click it "Eject" does not appear as an option.
Why it disappears from "This PC" is a mystery.

Note: On my machine (ASUS) if I take out the diskette or disconnect the drive, "Floppy Disk Drive (A" stays in the "Quick access" menu. So no need to keep a diskette in the drive all the time or even have it connected all the time. Worked fine after I reconnected
it.

Note 1: Under "Devices and Printers" the Drive was identified as "TEAC FD-05PUB". If you get something different (assuming you have a TEAC) try running "Troubleshoot" and see if that corrects it.

I hope the information above helps.

Have a wonderful day ahead and stay safe.

With Warm Regards,

 

Floppy disk drive and windows 10

This instructions are for windows 7 put it dose work on windows 10

In this day and age, with the fact that most new pc’s do not have floppy drives anymore, as a tech, I still find times where bring out an old reliable floppy is my best way to resolve a problem. Many people still have some “classic” tools that are
on floppy, or documents or pictures saved on floppy (Before CDRW/DVDRW drives became the norm, floppy disks were the way to store and transfer files).

The problem is that many of the Floppy drives do not have drivers or “official” support for Windows Vista or Windows 7. This post covers just such an issue. I use an Iomega USB drive, and whenever I plug it into my Windows 7 pc’s, I get a message
that Windows can’t find a driver for my device.

Here are some simple steps to get your drive to work with Vista or W7.

1) When you install the drive you will get the message that your drive needs to find drivers. Just hit Cancel

2) Go to start –> Control Panel –> System –> Device Manager

(Example from Windows 7, Vista may look a little different)

3) When the Device Manager opens you will see a listing for X1DE-USB with a Yellow triangle next to it under Other Devices. On that line item right mouse click (NOTE IM SAYING RIGHT MOUSE) and then select Update Driver software and left mouse click
(NOTE THAT I SAID LEFT)

4) Now select Browse my computer for driver software

5) Now select Let me pick from a list of device drivers on my computer and click on Next

6) Now you will get a box to select your device type from list, click on “Show All Devices” and click on Next

7) In the following window, for the box on the left select NEC Systems, and then on the right select NEC USB Floppy then click on Next

8 ) You will be told by Windows that “Installing this device driver is not recommended…..” its ok just click on Yes to continue.

9) Lastly you will be told that Windows has successfully updated your driver software.

Now if you look at the Device Manager you will see the listing for Floppy disk drive – Citizen X1DE.

Finally if you look in the My Computer icon, you will see the A: drive listed for your floppy drive

With that you now have a working Floppy USB drive.