Windows 10: My pc won't show display after resetting bios settings to default

After disabling my Intel Uhd gpu from the device manager, i had trouble booting so i reseted my bios settings to default, my pc turns on but i get no display after trying on two monitors.

:)

 

4870x2 won't display at 1680x1050 at all!

OK. Now I know what ur problem is. Step by step:
1. Go to Catalyst Control Center
2. Click on the word "Graphic" right on top left corner. It will display drop down menu
3. Click on Display monitor and will see the list of monitor at near bottom
4. Right Click the monitor and select "Configure". It will show up the window
5. There will be 3 option to select. Select the middle one and then click on the tab which show the bar with 15%.
6. Drag the bar to max, and the screen will stretch to the native resolution 1680x1050.
7. Also click the tab with showing RGB drop down list and select the last one (it will change to image quality for pc).
That's it. Good Luck.

 

Display settings

Hi Julia,



To reset the settings back to default, follow these steps:

• Go to your desktop, right click and select Display Settings.
• Choose the appropriate settings from the options under Display.

Let us know if the above steps resolved the issue.

 

No display after resetting bios to defaults.

I upgraded my pc, a new mb ram and cpu. All old parts were working before.
mb: z790 strix gaming wifi

cpu: i5-13600kf

gpu: gtx 1080 (next upgrade)

ram: Teamgroup 7800 ddr5

psu: evga 1000 watt gold

storage: Corsair nvme, Samsung evo pro ssd, 2 old HDDs

When I booted first time it went to the bios safe mode, hit f1 expecting to make some adjustment to get the nvme working and set xmp and set display to graphic card mode ect… saved and reboot, still had problems and didn’t load in to windows. Back to bios and hit reset to defaults saved and reboot.
now when to starts up, just a blank screen. No signal output and can’t get back in to bios by hitting delete key. Onboard led lights show green on the boot light indicating everything posted fine and should be loading in to windows I think. I suspect the my f sku cpu may be the problem as it has no video output ability and now that I have reset to defaults prehaps the mb is in cpu graphics mode and not automatically switching over to dedicated graphics mode. Any suggestions? My current plan to to switch out gpu with an old gtx1050, try a bios flashback/update, or buy a cheap 12th gen cpu with video to troubleshoot with.