Windows 10: My printer is not working properly

Windows 10 latest update spoil my printer connection now I can't print anything from my printer

:)

 

No printers work any more

Hi,

We would like to ask you some questions so that we can assist you properly:

• What changes have you made to your PC prior to this issue?
• Can you walk us through all the troubleshooting steps that you performed so that we can avoid giving you the same advise?

For now we suggest that you run the built-in printer troubleshooter and check if it resolves the issue. Here are the steps:

• Press Windows key and X and select
  Control Panel.
• Click on Troubleshooting.
• On the left pane, select View all.
• Look for and run the Printer troubleshooter.
• Tap Next and follow the onscreen instructions.

You may also check this
link to for useful suggestions on how to fix printer problems.

Regards.

 

Printer not working

Hi Terry,

Thank you for posting in Microsoft Community.

How have you connected the printer to your computer? Is it wired or wireless connection?

I suggest you to follow the methods below and check if it helps.

Method 1: Run Hardware and Devices Troubleshooter

Follow these steps to run Hardware and Devices troubleshooter:

• 
  Press Windows key + X and click on
  Control Panel.
  
• 
  Select Troubleshooting.
  
• 
  Select View all on the top left corner.
  
• 
  Click Hardware and Devices.
  
• 
  Follow the on-screen instruction to run the troubleshooter.
  

Method 2: Uninstall and reinstall the driver

I suggest you to try uninstall the Mouse, Touchpad and Printer drivers check if it works for you.
Follow the steps below:

• Press Windows Key + X key and click Device Manager.
• Right-click on the Touchpad device listed and click on ‘Uninstall’.
• Select the option to Delete driver software.
• Follow the same steps to uninstall Mouse and Printer drivers.
• Restart the computer after its uninstalled.

Try to access the device manufacturer's website and download and install the latest chipset, touchpad and Printer drivers.

Hope this will fix the issue, if not let us know with the updated status and we will be happy to assist you further.

 

Can't get my HP Printer to work on Windows 10

Greg,

I am having the same issues with my HP3600n Color LaserJet not working after upgrading from Windows 7 to Windows 10. I have followed your November 8th Post, details below:

Step 1 - Plug printer in by USB, power on printer, watch for animation in System Tray shown while searching for driver.

• There was no animation in the system try after plugging in the USB cable and powering on the printer.

Click on it to monitor driver install. It may ask to go to Windows Update to pull in the driver.

Step 2 - Type Devices and Printers in Start Search box, open location, do you see the printer there?

• Yes. The printer is listed.
• Set as Default, if it won't print right click to Troubleshoot.
  • The printer responds to a print request but, instead of printing the sent job it prints out a PCL error as follows:

PCL XL error

Subsystem KERNEL

Error: IllegalTag

Operator: 0x98

Position: 3

Step 4 - Typed "Update" in Start Search box, Check for Updates, install all including Recommended, expediting restart when requested, going back to Check for more until none are offered.

• Received notification "Your device is up to date. Last checked: Today, 2:52 PM (it is now 2:52 PM)

Did the printer driver arrive? No.

Step 5 - Download the basic driver (if no scan) or software (if scanning needed) package for the printer from the HP Support Downloads webpage for your exact make/model. Install the software with the printer USB unplugged, wait for it to prompt to plug
it in.

Let us know how this works. It may require a few extra steps.

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c03515691

• Downloaded Dot4x64.msi from HP support. Installed the software (with printer USB unplugged), plugged it in when prompted. This driver did not work. I received the same KERNEL error as above.

• Downloaded HP_CLJ3600_64Bit_HB.exe from HP support. Installed the software (with printer USB unplugged), plugged it in when prompted. This driver did not work. I received the same KERNEL error as above.

So, at this point, I have followed all steps with no success. I can "see" the printer in Devices and Printers however, the printer ICON doesn't look like a HP3600n, it is the Windows default printer ICON. Normally when the properly drivers are installed
the ICON is customized to look like the installed device or printer.

Do you have any other suggestions that I might try?

Thanks!

Dave Williams