Windows 10: My remote device 192.1..... is not set up to accept connections on port TCP... My printer...

My remote device 192.1..... is not set up to accept connections on port TCP... My printer cannot ber contacted over the network.

:)

 

Windows 10 Home Won't Print to Remote Printer


I have three computers.
Machine 1: Windows 10 pro, has the USB Brother HL-5040 printer
Machine 2: Windows 10 pro, prints OK to the remote printer.
Machine 3: Windows 10 home, Used to print, but not anymore (THIS IS THE PROBLEM).
I’ve tried everything that I can think of, and would appreciate any suggestions.
I did these steps on Machine 3 that did not work.

1. Remove the printer device.
2. Add a Printer
3. The printer that I want isn’t listed
4. Select a shared printer by name
5. Browse
6. Select the displayed Machine 1.
7. Select the displayed Printer.
8. Next
9. Failure “Connect to Printer”.
10. Add a printer using a TCP/IP address or Hostname
11. Next
12. Set Hostname to Machine 2, and set port name.
13. Detecting TCP/IP Port
14. Additional Port information required.
15. Device Type – Standard, Brother Port Server
16. Next
17. Detecting the Driver Model
18. Install The Print Driver
19. Select Brother and Brother HL-5040
20. Next
21. Replace the Current Driver
22. Printer Name (setting it to HL-5040)
23. Next
24. Do not share this printer
25. Next
26. You’ve successfully added “HL-5040”
27. Finish

Printing on Machine 3 puts the document in the print queue, which reports error printing.
Printing from Machine 2 to the printer on Machine 1 works perfectly.
All three machines are in the same HomeGroup. Machine 3 can access the shared files from Machine 1.

 

The remote device or resource won't accept the connection / The device or resource (PC-NAME) is not set up to accept connections on port "The File and printer sharing (SMB)

Ok everyone. First let me say I have spent 4 hours trying everything I could find through google searches:

Here is what I am trying to do:

1. Create a Share on My Windows 10 Pro Version 1709 OS Build 1299.371 computer

2. Access said share from my Macintosh Mac OS Sierra Version 10.12.6

3. Access the share I created under the network icon in Explorer from the same PC that I created the share.

I am NOT able to this from either device. I constantly get an error: "The remote device or resource won't accept the connection" with details statating "The device or resource (PC-NAME) is not set up to accept connections on port "The File and printer sharing
(SMB)".

Network Discovery Is Turned On

Anti-Virus is now Uninstalled

I have turned the firewall on or off does not matter.

I have added a rule to allow port 445

I have allowed File and Print Sharing over SMBDirect

I have edited the registry

• HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Browser\Parameters
• Change the value of MaintainServerList from Auto to Yes
• If it is not there, add a new String Value IsDomainMaster and set it to True

I have enabled NetBois under Wins

I have run the SFC with a result of "Windows Resource Protection did not find any integrity violations."

I have re-enabled Control Panel / Programs and Features / Turn Windows Features On or Off and make sure SMB 1.0/CIFS File Sharing Support

These services are all running:

• "Computer browsing" -> started
• "Ssdp discovery" -> started
• "Tcp/ip netbios helper" -> started
• "Server" -> started

I have uninstalled and re-installed the network card.

NONE of these items has resolved the issue. Without going into a rant, it should not be this hard to share files.

 

Printer offline - the device or resource is not set up to accept connections on port 9100

Printer can print independent of computer with Windows 10, but when I try to print something on my computer via my HP OfficeJet Pro 8710 PCL-3, it won't print. Printer troubleshooter states printer is off and needs to be turned on (even though the printer
is on) and provides error message: "the device or resource is not set up to accept connections on port 9100"