Windows 10: My screen turns black but power stays on. sometimes fans speed up high too.

Ive tried uninstalling drivers with DDU and reinstalling drivers/using different versions of drivers/Reseating the gpu/cpu/ramnothing worked. eventually my screen started turning off right after i entered my pin on start up sometimesi checked my event logger and found thisThe driver \Driver\WUDFRd failed to load.Device: ROOT\SYSTEM\0004Status: 0xC0000365My specs:zotac oc rtx 4060ryzen 9 5900xMSI B550-A PRO

:)

 

Fan speed too high and receives black screen

Hi,

I appreciate if you could answer to a few questions to narrow down to the issue.

• What is the make and model of the computer?
• What was the reason for you to perform a reset?
• Does that mean you receive black screen on the desktop?
  

First let us troubleshoot for the black screen issue and as an initial troubleshooting step, I suggest you to refer to the article provided below and check if that helps.

Troubleshooting black or blank screens in Windows - Microsoft Support

Once done with that, let’s check the cause for the fan speed.

a. While on the desktop, right-click on the taskbar, click on
Task Manager.

b. Click on the Processes tab and check if any processes that is running high.

If none of the process is running high then I suggest you to update the graphics card driver and check if it resolves the issue.

1. Press “Windows key + X” and click on “Device
Manager”.

2. In the list of devices, you should see the Display Drivers.

3. Right click on the device and then select "Uninstall".

4. In the uninstall dialog, make sure you select the option to delete the driver package from the system. This causes the driver package installed earlier to be deleted.

5. In the Action menu of Device manager, select “Scan for Hardware changes” option. This will cause the device driver to be reinstalled. Once the driver is installed, close all windows and restart the computer.

Hope the information helps. Let us know if you need further assistance. We will be happy to help.

Thank you.

 

Fan speed too high and receives black screen

I reset my pc too factory settings now the fan speed on all fans are rela high. will not show anything on display screen.

Original title: pc

 

Screen Randomly Goes Black, Fans Max Out - PC Requires Power Cycle to Recover

I am experiencing a critical issue with my Maingear PC, which I hope you can assist me in resolving. My PC's screen randomly goes black, and the fans ramp up to the highest speed. I can only restore the PC to a working state by performing a power cycle.

PC Specifications:

• Processor: AMD Ryzen 9 7950X (16 cores, 4.5 GHz, Boosts to 5.7 GHz)
  
• Graphics Card: NVIDIA GeForce RTX 4090
  
• Cooling: MAINGEAR EPIC RGB 360 AiO Liquid Cooler
  
• Motherboard: ASUS ROG Crosshair X670E Hero
  
• Memory: 64GB FURY Beast RGB DDR5 6000MHz (2x32GB)
  
• Power Supply: MAINGEAR 1000W Ignition
  
• Operating System: Microsoft Windows 11 Pro
  
• M.2 NVMe SSD: 1TB Kingston FURY Renegade PCIe 4.0 NVMe M.2 SSD
  

Troubleshooting Steps Taken:

1. Enabled and disabled XMP memory in the BIOS.
   
2. Reinstalled the graphics card drivers.
   
3. Updated the BIOS firmware.
   
4. Verified that RAM modules are installed correctly.
   
5. Ran the System File Checker (sfc /scannow) to detect file corruption.
   

Unfortunately, these steps have not resolved the issue, and I am still experiencing the black screen and high fan speed symptoms.

I would appreciate any assistance or guidance you can provide to help resolve this issue.