Windows 10: My SD card isn't appearing.

I have an SD card that isn't appearing on File Explorer. I tried some methods I found online, but none worked. Along the way, I discovered that, even though it didn't let me insert the screenshot, "This device cannot start. Code 10" on the SD Storage Class Controller in Device Manager. I tried other SD cards, which worked completely fine, so I'm left wondering if I lost 32 gigabytes of data. The SD card is a SanDisk Ultra Plus 32GB Ultra Plus SDHC UHS-I. If there is a way to get the SD card working again, please inform me.

:)

 

SD card failure

Hi Andrew,

I would need to ask few questions so I can isolate your concern properly. Kindly answer the following:

• Did you get a specific error message?
• What are the troubleshooting steps you have done so far?
• What's the current build of your computer? Press Windows key + R and then type winver.
• Did you try to run a full system scan using your anti-virus? Can you tell us the result?
• Does your SD card has a write protection?

Meanwhile, you may try these troubleshooting steps:

Step 1: Run the Hardware and Devices troubleshooter. Open Settings> Update & Security> Troubleshoot> Hardware and Devices> Run the troubleshooter.

Step 2: Check SD Card in Disk Management.

1. Open Disk Management.
2. Your SD card will appear as a removable disk.
3. Check if it has a drive letter.
4. If it does not show anything, right click the SD card and then select “Change Drive Letter and Paths”.
5. Click “Add” and select a drive letter, then click “OK”.

Step 3: Update SD card driver.

1. Open Device manager.
2. Find your SD card and right click it.
3. Select Properties.
4. Click the driver tab and then select Update Driver.

Note: You may need to use a keyboard and mouse to connect to your laptop to perform the said steps if it does not allow on tablet mode.

 

Printer isn´t working after latest update.

After the latest update from Windows, my Canon Pixma ip6600 printer isnt working. In Device Manager it shows up as working properly but when I go to print it isn´t listed as an option in any programs. Troubleshoot suggests it´s a USB 2 printer on a USB
3 port and that that´s the problem but that cant be since it worked fine before the update. I´ve tried to uninstall and plug it back in but that doesn´t work either.

 

SD CARD

All appps are installed in phone memory. There is no way around this. You can install a game FROM the SD card but it is then installed in the device's main memory.



STEP 1: Copy all the .xap files which you want to install in your Windows 8 phone to your SD card.

STEP 2: Now go to Start -> Store -> SD card and wait for few minutes for all the .xap files to be loaded.

STEP 3: Select the app which you want to install -> Select Install option.

STEP 4: If your apps are compatible then you can see them in the Compatible apps list if not it will be shown in the Incompatible apps list.

STEP 5: Once you have successfully installed the apps, you can see those apps listed in the Apps list from start.

http://windows8search.com/forum/how-install-xap-files-windows-8-phone-2630.html