Windows 10: my system did an automatic update and now will not boot

my system did an automatic windows update. upon completion the system will not restart.I tried resetting it with the power button with no success.Ever since the update, when turning the computer on, the monitor goes to an "HP" logo, and no booting.

:)

 

Vista Automatic Updating Error

Automatic Updates isn't currently running.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Vista Automatic Updating Error

Resolution Suggestion:

# To resolve this problem, make sure that BITS and the Automatic Updates service are started..

A simple solution but one that works in most circumstances!

1. Click Start, click Run, type services.msc, and then click OK.

2. In the list of services, right-click Automatic Updates, and then click Properties.

3. In the Startup type list, click Automatic, and then click Apply.

4. If Service status is set to Stopped, click Start, and then click OK.

5. Right-click Background Intelligent Transfer Service, and then click Properties.

6. In the Startup type list, click Manual, and then click Apply.

7. If Service status is set to Stopped, click Start, and then click OK.

TOTO88: Situs Slot Online Gacor source *Smile hope that helps.