Windows 10: My Wifi adaptor keep going off.

\VEN_8086&DEV_06F0&SUBSYS_00748086&REV_00\3&11583659&0&A3 had a problem starting.i check wifi adaptor log and this keep happening when my wifi button gone, any suggestion??

:)

 

Cannot install Windows 10 due to wifi adaptor

Hi Nigel,

Thank you for posting your response.

As you have stated that your computer is stuck in the splash screen after the first boot, I would suggest that you power down your computer and then restart the system and check. To do so follow the steps below.

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system

if you roll back to the previous Window, you can also try to install the latest drivers for your wifi adaptor and check if it helps you proceed with the installation. The above issue that you are facing is due to the wifi adaptor, and I recommend that
you contact the manufacturer of the device that is Broadcom to check for compatibility.

Hope this helps

 

wifi adaptor netgear wna1000m -n150-usb micro adaptor

Hi,

Thank you for posting in Microsoft community.

1. What exactly happens if you connect "wifi adaptor netgear wna1000m -n150-usb micro adaptor" ?

I suggest you to open device manager and check if he sees any yellow exclamation
when the device is connected.

You can update drivers and check if that helps.

• Press “Windows + X” and select
  Device manger.
• Expand the driver icon.
• Right click on the driver icon
  and click on Update.
• Follow the onscreen instructions to update the driver.

if issue persist, You may go ahead and uninstall the drivers for NetGear wireless adaptor from device manager, and reinstall the drivers.

1. Click start, type device manager in search box.

2. Go to device manager.

3. Click on network adaptor, right click on netgear wireless adaptor, and uninstall.


Please go to the manufacturers website, and download the latest drivers. If no drivers for win 10 install the available drivers in compatibility mode.

1.Right-click on the driver setup file and click on ‘properties’.

2. Click on the ‘compatibility’ tab and check the box "Run this program in compatibility mode for” and select Windows 10 operating system from the drop down.

3.Click on ‘Apply’ and click ‘OK’ and run the file to install it.

Hope this helps. Get back to us if you need further assistance.

 

Wifi adaptor problem


Hi, My wifi adaptor suddenly stopped working, but I can connect to internet with Ethernet cable.
Replaced wifi adaptor but still cannot to internet with same.............any ideas?
Regards,
John P.