Windows 10: My wifi is not getting displayed

Hello,

I am starting to face an issue with my Wifi. The wifi connections are not getting displayed. I can only see a globe sign with a block mark.

In the device manager there is an exclamation mark on my wifi driver and it says - "Code 10 - the device cannot start".

I have tried mutiple things and to my surprise some of them work but the problem resurfaces after 1-2 days.

1. Enable/Disable the driver
2. Installing a new driver/updating the driver
3. Uninstalling the driver and installing again
4. System Restore
5. Windows Reset

I am not sure if this problem is related to the driversoftware or the hardware.

Can anyone help me out here? Amidst the lockdown there is no service center open.

My wifi device - Intel dual band 9560

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Cheap Photo box that will get the job done

WEll i took on this project for PP hes a hardware reviewer and wants to get the professional looking pics for the Pc parts

Materials:

• Big cardboard box

• a razor

• white material 3 yards

• cone lights

• stapler

• medical tape

• pvc pipe about 6 inches longer than your box

• white paint any cheap finger paint would work

the project I'm guessing will cost me $30 if it works out properly
I will post pictures and step by step as i do it

 

Microsoft Display Adapter not getting connected to PC

Hi,

Thank you for posting your response.

I would suggest that you follow the steps below and check if you can find the adapter in Device Manager.

1. Right click on the Start Menu and then click on Device Manager.

2. From the list of Hardware, find the Microsoft Display Adapter and check if you can find the device in question.

I would also suggest that you follow the troubleshooting steps provided in the first link and check if it helps.

Vanessa