Windows 10: My windows 10 got into BSOD error and I can't access the automatic repair tool as well. Help!!

My windows 10 got into BSOD error, I tried to fix it by going into automatic repair mode but for some reason it won't let me access it. After this I tried to use the available options by pressing F8 and going into safe mode to access the computer, but still I could not. After this I tried to reinstall windows using bootable USB but still I could not install it,I tried many bios related settings like SATA controller settings and changing the boot mode from default to legacy but still the issue persists. I got to a point where I saw the windows logo showing up, by going into legacy boot mode, b

:)

 

HELP! Windows 10 automatic repair couldn't repair PC. Details below

Hi Matthew,

As you are facing issue withAutomatic Repair, we would assist you for sure.

In order to understand the issue in a better manner, please share the following details

• 
  I tried system restore” What is the error exact error message you received?
  

If automatic repair fails, you may try to repair them using these commands through Command Prompt under Advanced Options. Follow the steps:

Since you have done most of the troubleshooting steps, I would suggest you to try repairing the Boot Configuration Data through the command prompt by following the steps below and check if it helps.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• 
  bootrec /fixmbr
  
• 
  bootrec /fixboot
  
• 
  bootrec /scanos
  
• 
  bootrec /rebuildbcd
  

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

Thank you.

 

Windows 10 automatic repair error

Hi

Windows 10 startup error

My system showing windows automatic repair but couldn't repair my pic i trying to these step

• bootrec.exe /rebuildbcd
• bootrec.exe /fixmbr
• bootrec.exe /fixboot

Only rebuildbcd was successfuly finish but fixmbr couldn't complete showing some error

Help as soon as possible

Thank you

Arun

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.