Windows 10: My Windows 11 hotspot configuration does not see my USB network adapter. How do I overcome...

I am using USB tethering to connect to the internet. I do not want to use my wi-fi to connect my laptop to my tablet. I want my laptop hotspot settings to see the USB network adapter, however it currently does not.How can I correct this?

:)

 

Mobile Hotspot

We appreciate that you have tried the suggested steps above. Have you tried to connect other devices to the mobile hotspot on your PC?

Since the issue is still the same, we suggest that you uninstall/reinstall the network adapter driver and check if this will resolve the issue. Follow the steps below:

• 
  Press Windows key + X and click on
  Device manager.
  
• 
  Locate for Network adaptor and click on it expand it.
  
• 
  Right click on the device and click on
  uninstall.
  
• 
  Once you are done uninstalling the driver, restart the computer. It will automatically install the generic network adapter driver.
  

We can also update the network adapter driver. Skip step 3 from the above steps and right click on the device and click on update.

Feel free to post back for any updates.

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

The Microsoft (Hotspot) wi-fi direct virtual adapter is blocking FTP

Hi Support,

I have encountered an unexpected problem when using the Windows 10 Hotspot feature. When I connect to the hotspot using another Win 10 system everything works as normal except it blocks the FTP protocol.

I have an application that connects to a website using FTP, it has run with no problems for 5+ years. I now have a situation where I am using a Win 10 laptop to boost the signal of a wi-fi router in another building. It is located to get the best signal and it works fine, it broadcasts a strong signal allowing other devices to use it.

However, when connecting to the Win 10 Hotspot the FTP protocol is blocked, everything else runs as normal
I have confirmed:

• I can FTP as normal if I connect to the same router as the Win 10 system that is step up with the hotspot.
• If I connect to the Win 10 hotspot FTP is blocked.

This is the first time I've used the hotspot feature in Win 10, I really like it and it's ideal for my situation but the FTP problem limits how much I can use it.

All other protocols work as normal, it's as if a rule somewhere is set to block FTP if passing through the Microsoft (Hotspot) wi-fi direct virtual adapter.

See attached images for the status of the hotspot adapters, they both have the following settings.

IPv4Connectvity: Internet
IPv6Connectvity: No network access

I can FTP from the system with the hotspot setup using the built-in wi-fi adapter with no problems, it's only when I connect via the hotspot that FTP gets blocked.

I've tried a few things to change the IPv6Connectvity but no success so far. Also, if this was the problem why only block FTP and allow all other protocols and why does the built-in wi-fi adapter allow FTP as normal yet it displays IPv6Connectvity: No network access?

It's easy to try and reproduce this condition, all you need is two Win 10 systems and an FTP account on the web.

• Setup Laptop1 to connect to Router1 and also set up a hotspot called Hotspot1.
• On Laptop2 connect to Router1 and use the command-line FTP client to log in to your FTP server.
• There should be no problems doing this.
• Next on Laptop2 connect to Hotspot1 and try to log in again to your FTP account.

If this fails then you will have reproduced the same failure.

Note:

• I am using ACER Win 10 laptops that are fully updated.
• All the ACER laptops use the built-in Windows Firewall and Security Centre.
• When connecting to the Hotspot both Outlook and OneDrive detect it as a metered connection and prompt you to confirm you wish to still connect. When you confirm you still want to connect everything runs as normal.
• This problem occurs at two different locations that use different laptops, routers, and broadband provider (UK: EE & Virgin)

I have not been able to try this on a non-ACER laptop so that would be useful to do but my testing so far has isolated the problem to only when connecting via the Hotspot.

So, in summary.

• When connecting to a Windows 10 Hotspot all other applications run as normal except for FTP.
• I have confirmed this on separate laptops (though they are all ACER) and two different routers and broadband providers at different locations.

It would be great if someone could test this on non-ACER laptops and another broadband provider. If the problem is present then it would suggest this issue is widespread but I've not been able to find anyone else who's experienced this problem.
thanks,Phill.