Windows 10: My windows device do not want to connect with my personal WIFI

My windows device do not want to connect with my personal WIFI

:)

 

Windows 10 - WIFI 2 - Cant connect

Hi
Myamara,

It is possible that your drivers are outdated or the connection itself has the issue. We suggest that you perform
these methods of troubleshooting
and check if there are any changes:

Method 1: Reset TCP/IP

To do this, follow these steps:

• 
  Run
  Command Prompt
  as
  Administrator.
  
• 
  Run
  this command:
  
  • 
    netsh int ip reset
    and hit
    Enter.
    

Exit
Command Prompt
and
monitor your WiFi connection.

Method 2: Disable auto turn-off of WiFi device.

Go to
Network and Sharing Center. At the
right pane, click
Change adapter settings.
Right-click
on your
connection name(WiFi name)
and go to
Properties.Click
the
"Configure..."
button and go to
Power Management
tab.Uncheck/disable
the
radio button
for
"Allow this device to turn off this device to save power". And then,
Restart the PC(Important).

Method 3: Reconfigure TCP/IP

To do this, follow these steps:

• 
  Run
  Command Prompt
  as
  Administrator.
  
• 
  Run
  these following commands:
  
  • 
    netsh int tcp set heuristics
    disabled
    
  • 
    netsh int tcp
    set global autotuninglevel=disabled
    
  • 
    netsh int tcp set global
    rss=enabled
    

Update us on how it goes.

Regards.

 

When will the wifi connectivity problems be solved?


OK, so the Windows 10 engineers bollixed up the wifi connectivity part of the operating system. Everybody knows that by now. It seems they are making some progress in resolving it. Now, instead of seeing "Secured, No Internet" on your list of wifi connections, you see "Connected, Secured" EXCEPT no webpages will load. So you really aren't connected. It does seem to be a step in the right direction. Does anybody know when they plan on a full and complete repair of this screw up of epic proportions?

 

Kick or Ban who is connected with my internet ?

You would have to do that on your Router's setup webpage. 1st step is to turn on WiFi encryption and password. 2nd step, if you feel you need to, is set up an access list of the physical MAC addresses for the network adapters of the computers you want to allow to connect. Any other network adapter not on that MAC filter list won't be able to connect. (but MAC addresses can be easily spoofed, if the third person knows which MAC addresses are allowed).