Windows 10: My windows setting do not have Gaming.

My version is 21H2

:)

 

Game controller ID settings

Hi Joe,

Thank you for the update. I understand your concern.

I would suggest you to look for the Devices settings in Control Panel and check if the game controllers are listed. If so, refer to the following steps to alter the settings and check if these are helpful in resolving your issue.

a. Right click on one of your game controllers and click Game Controller Settings. Note where in the list it is. If it is not at the top proceed to the next step.

b. Right click and remove all your other controllers (not the 360/gamepad) and let them reinstall automatically.

c. Once complete right click and check the list again and see if the 360 controller/gamepad is at the top. If so, give the game another try and see if it detects your controller.

If the issue still persists, restart your console and then try to reconnect your controller.

Hope this information is helpful. Please post back your results for further assistance.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds