Windows 10: my Windows11 got a serious issue after the last update

I can't see my desktop and taskbar. Because of broken explorer.exe, I can't open control or ms-settings but taskmanager. Could any one post a copy of explorer.exe? Thanks

:)

 

Wifi serious issue....

Hi Garrett,

Thank you for posting in Microsoft Community.

In regards to the issue, I require additional information to make sure that helps us to resolve the issue easily:

• 
  I would like to know if you are able to find the “Wireless Network Card” device in the “Device Manager”. If yes, then what is the
  status of the device?
  
• 
  Do you get any exclamation mark in device manager under network adaptor?
  

You can check the exclamation Mark by going to Device manager:

• Press Windows + X key together and select Device Manager.
• Locate the Network adapter and expand the driver icon.
• Look for Wireless driver. Do you see any exclamation Mark?

Let’s try updating the driver for the mouse and keyboard and verify the results. Follow the steps:

• Press Windows and X key together and select
  Device Manager.
• Locate the Network adapter icon. Right click on the driver icon.
• Select Update driver software.
  
• Select "browse my computer for a driver software".
• Select “Let me pick from a list of device drivers on my computer”.
• Select the driver option according your device model and installed.
• If this does not work, follow the steps from ‘1’ to ‘3’ and select “Search automatically for the updated driver”.
• Choose the same steps to update the driver for keyboard as well.

If issue still persists, I would suggest you to install the drivers in compatibility mode and check if it works.

Follow the steps provided below to install the drivers in compatibility mode:

• Right-click on the driver setup file and click on ‘properties’.
• Click on the ‘compatibility’ tab and check the box "Run this program in compatibility mode for” and select Windows operating system from the drop down.
• Click on ‘Apply’ and click ‘OK’ and run the file to install it.

You can also follow the steps to reset Winsock. Then you can try release and renew IP address.

• Windows + X and select Open the Command prompt with Admin
• enter this command netsh winsock reset
• restart the computer:

Hope it helps.

Thanks.

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

User.000 issue after updating to 1909

I'm one of the many people suffering from issues with user profiles after applying Update 1909 to Windows 10. I've read all the threads I can find on the topic here and have followed the suggestions, all to no avail. Any other thoughts are appreciated.

After applying Update 1909, the ProfileImagePath was changed to c:\users\User.000
One file that was always in use and couldn't be removed was left in c:\users\User (can't recall or find the exact file now), so I could never rename or remove the c:\user\User directory.

I followed the multiple suggestions from Brink and others:

• Rebooted at least 6 times
• Enabled hidden Administrator
• Booted into Safe Mode
• Changed ProfileImagePath
• Tried to rename c:\users\User but couldn't because a file was still in use
• Copied all data from c:\users\User.000 into c:\users\User
• Rebooted and had temporary profile
• Followed steps in Brink tutorial to change ImageProfilePath; rebooted with no change
• Restored using Restore Point from before Update 1909 - returned to single profile state (User.000)
• Removed each update that was installed individually and rebooted after each update removal - profile state never changed
• After all updates were removed, repeated the steps above with hidden Administrator, changing profile, etc. - same issue with file in use in c:\users\User
• Followed all steps above with hidden Administrator but without copying files from User.000 to User - same results

Any suggestions are greatly appreciated!