Windows 10: my wireless printer will not connect to internet

my wireless printer will not connect to the internet. sometimes it will recognize the network and then disconnect immediately.Most times it won' t even recognize

my network but will nearby networks

:)

 

wireless printer

Have you downloaded and installed the latest Windows 10 driver?

http://ftp.hp.com/pub/softlib/software12/COL345...

Step 1: Prepare for installation

Before setting up the printer on your wireless network, gather the network name and password, and turn on your router, printer, and computer.

Gather the following items:

Network name: The network name is the SSID.

Security passphrase (WEP key or WPA)

A computer that is connected to the wireless network

Internet access (recommended): HP recommends broadband Internet access such as cable or DSL.

note:

Internet access is not required for you to install your printer with a wireless connection. However, you do need Internet access to use Web Services, get printer updates, and to download drivers from the HP website.

Your wireless-capable printer: Place it close to the computer during the installation procedure.

Make sure the printer, router, and computer are all turned on, and that the computer is connected to the same wireless network you want to connect the printer to.

Disconnect the USB cable if it is connected to the printer.

Optional: If you previously installed the software for a USB connection and now want to change to a wireless network connection, remove the USB installation before you continue.

Search Windows for your printer model name, then click the printer name in the list of results.

The printer software opens.

Click Utilities, then click Printer Setup & Software Selection.

Click Convert a USB connected printer to wireless or Connect a new printer depending on your version of Windows.

Follow the on-screen instructions to complete the connection. Once the printer has been set up on the wireless network, there is no need to continue with the steps in this document.

Step 2: Connect your wireless printer to a wireless network

Connect your printer to your wireless network using the following steps.

Search Windows for your printer model name, then click the printer name in the list of results.

The printer software opens.

Click Utilities, then click Printer Setup & Software Selection.

If you previously installed the software for a USB connection and now want to change to a wireless network connection, remove the USB installation before you continue

Follow the on-screen instructions to complete the connection. Once the printer has been set up on the wireless network, there is no need to continue with the steps in this document.

Step 3: Download and install the printer software

 

Connecting computer with no internet connection to network printer


@dk1971

1. Open Admin command and type: ipconfig
   
   
   
2. Win+X->Control Panel->Netwok and Sharing Center
   Follow the screen shot. This should disable internet access from this PC but allows access to local device(s)
   NOTE: Use the IP & Subnet Mask from step 1. Leave Default gateway & DNS Server blank
   
   
   

 

Brother printers - wireless connection

Yep, over the years I've contacted Brother by phone and online chat and email. They have a list of stock responses, none of which have solved the problem. Their printers work great when they're actually working. But the wireless issues are maddening. With other printer brands, my experience has been different - when the internet connection is restored, the printers automatically reconnect to the wifi SSID and work properly again, immediately. But for some reason this does not happen with Brother, even when their printers have reconnected.