Windows 10: не выключается моноблок acer z3171 до конца

моноблок acer z3171 С виндовс 7 проблем нет. Выключается как надо. Из под 10-ки, до конца не выключается. Система завершает работу, экран гаснет, а кулер продолжает работать. Однажды, поставил параллельно UBUNTU - из под неё выключается полностью нормально. Нашел утилиту которая редактирует список операционный систем при включении компьютера. Добавил новую строчку с командой: HALT и сделал её по-умолчанию, и время установил 5 сек. В результате винду отправляю на перезагрузку, и она соответственно через HALT выключается. Когда включаю моноблок, то в диалоговом окне выбора системы, времени хв

:)

 

ACER ASPIRE TOUCHPAD

Check this list to find ACER and see if they list your computer as ready for the Creators update: https://answers.microsoft.com/en-us...puter-is/5152bb37-f95d-48a6-b7b2-ad0d5c738923
you should also contact Acer to find out if they have a suggested fix for this problem. You may have to install a slightly older driver.

 

Vintage: Acer Aspire One 722 {Ram Questions}

Hi Captain.

While I'm not answering your question on a new AV I would suggest as a possible step, upgrading your ram.

Crucial has ram for your device. $40 (not sure about tax or shipping) Your device seems to have one slot so you would need the 4GB stick. As you are using 32bit OS you can only use of 3GB. Crucial says you have one slot for memory and tear down videos seem to confirm this.

Here is the Crucial Link. Confirm for yourself that this is the right device. (Acer Aspire One 722-0022)

http://www.crucial.com/usa/en/compat...e-one-722-0022

Then here are the step by steps to replace.

https://www.ifixit.com/Guide/Acer+As...lacement/53216

Memory is static sensitive. Not as much of an issue when it is humid but still something to be aware of. If you don't want to buy a ground strap touch something that is grounded before starting the procedure and then don't go looking for things. Stay seated and perform. You should be fine.

External ram ??? Even if you could buy you wouldn't have port with sufficient speed to connect.

Ken

 

Acer reinstall issue

Had plenty of experience with Acer devices, been able to resolve all issues with the following steps ....

Clean install Windows 10 with Windows MCE

Run Windows updates (software and hardware) to exhaustion (i.e. none left)

Check for missing drivers ..... Control Panel > Device Manger

Access device support from Acer site, download identifiable missing drivers

Remaining drivers - download, install and run Snappy Driver Installer ORIGIN (make sure it's the ORIGIN version) - SDIO

Install ONLY !!! the required drivers (not any others, just because they're listed ... with installing drivers, it's always the case If it ain't broke, don't try and fix it). Required = missing or not working properly.

Uninstall SDIO (use Geek Uninstaller).