Windows 10: NEC Multisync PA271W fails to wake up from sleep

NEC Multisync PA271W fails to wake up from sleep

I enabled display power off in 20 mins and while my Dell wakes up, the NEC does not and the only thing I can do is bounce the system.

I installed the drivers for both monitors so now they appear correctly in the driver section instead of "Generic monitor" but still the NEC PA271W does not wake up.

:)

 

NEC Intros MultiSync PA271W 27-inch 1440p Professional Display

NEC released a new professional display, the MultiSync PA271W. Its 27-inch panel has an aspect ratio of 16:9, with a native resolution of 2560 x 1440 pixels. The 10-bit IPS panel is capable of covering 97.1 percent of AdobeRGB colour space. Other important specifications include panel response time of 7 ms (GTG), static contrast ratio of 1000:1, maximum brightness of 300 cd/m², and inputs which include DVI and DisplayPort.

The display has 15 cm height-adjustable stand, which allows the panel to pivot, swivel, and tilt. With its dual inputs, the display offers picture-in-picture and picture-by-picture features. The AmbiBright feature senses ambient lighting conditions and adjusts the display's brightness automatically. Backed by a 4-year warranty, the NEC MultiSync PA271W sells for US $1,649.

 

wake from sleep issue in windows 10

Hi,

Thank you for posting your reply. Apologize for the delay in response.

I suggest you to check which devices are configured to wake up the computer from sleep by following the steps below:

• Right click on Start icon and select Command Prompt (Admin).
• Type the command line below:

Powercfg /devicequery wake_armed

3. Check if the devices (Keyboard, Mouse, Ethernet cable) are listed.

If the system is not going to sleep and going to Hybernate, the only option to wake up is to press the Power button.

Hope the information is helpful.

 

Sleep / Wake Function, malfunctions after waking

Hi,

Issues that arise after waking up the PC from sleep mode might have been caused by a software conflict or system file corruption. For us to clarify the issue, we would like to ask these questions:

• What is the exact issue that you are experiencing?
• Did you notice any recent system changes prior to this issue?
• Have you encountered any error message?
• What troubleshooting steps have you done so far?

If you are having issues waking your PC from sleep, we suggest running the
Power troubleshooter as an initial troubleshooting. Kindly follow these steps:

• Click on Start.
• Type Troubleshoot, and then press Enter.
• Under Find and fix other problems, click on Power.
• Click on Run the troubleshooter button.
• Follow the onscreen guide.

We will wait for your response.