Windows 10: Need Help. to diagnose this issue

Good day,May I ask what programs I can use to diagnose this issue I encountered? Yesterday when I was exporting my edited photos in Lightroom. it suddenly shut down my PC and then reboot. but after I log in on Windows logon it shutdown again my PC then almost 2 to 3x repeat restarts of my PC before it runs smooth again.Today I just open my PC, and this came out. and cause again restart my PC several times before it runs smoothly again.

:)

 

Help diagnose connection issue

I think the OP should look into other ISP options available in their area. Sounds like an issue between signal quality locally and possibly on the WAN side as well. But if it is a pain to get service from a place you're paying for service, I'd be dropping them like a bad habit unless there's no other options.

A couple things I would do is to run a constant ping against the router's IP address and something like Google.

• Click start
• Type CMD
• Type ipconfig , document the default gateway as that is the IP address for your router. Common ones are 192.168.0.1, 192.168.1.1, 192.168.2.1. There are others, but I see those three the most as defaults for home-grade routers.
• Type Ping -t 192.168.0.1 (or whatever your router's IP address is)
• Open another CMD console (repeat first two steps)
• Type Ping -t google.com

Now keep an eye on the ms responses, try to do this at a time when things are good and a time when things are not good. If they're both all over the place its likely a router issue. If just Google is all over the place it is more likely to be your ISP's issue.

A lot of home-grade wireless routers will struggle with more than 5 simultaneous users, but you state that the issues occur when most folks are gone. That leads me to believe that there could be a couple of things happening here. But let me ask a few questions and see where we go. Sorry I have a lot to ask and am very curious about this situation, and hopefully these will help give us direction to getting your issues solved.

What kind of internet service do you have?

Cable? DSL? Line-of-sight wireless? Satellite?...most homebrew ISP's are the Line-of-sight so I'm assuming that's what it is for now.

LoS ISP's can have more outages leading to lower reliability, and they usually have lower quality help with some issues..especially if they're stretched thin over their area. We have a lot of local guys, they all start promising...every one of them ends up being subpar and assholes to deal with .​
Do these issues occur at the same time of day or is it more random?

You mention a 120ms ping, how are you measuring this?

You also say locally to 120ms, which would be pretty bad actually for a small LAN. You should see 1-10ms in most cases. Can you clarify this?

What are you most frequently doing when the network has these issues? Downloading? Browsing?

I ask the above because viewing and downloading certain content can be detected and filtered by ISP's at which point they will throttle your service...so if it is illegal, then that's getting flagged. Not saying you are, but throwing that out there because it happens. Though in many cases, at least in my area, you'll also receive a warning letter in the mail.​
As suggested above you could also try another router hooking it up to the LAN port that you had your other PC connected to.

Also as suggested above, you could run Wireshark. Though I have a feeling with the wireless signal issues, something else is at play here.

Does the modem/router reboot frequently as well?

Can you provide us with the make/model of the modem/router please?

Where are you measuring your wireless network's dB signal rating?

Have you tried Acrylic?

Would you and post a screenshot here after say 10 minutes?

If I had to just shoot from the hip and just guess, I'd go with a failing router. With all the wireless network variability issues, the dropouts even on LAN... but line/signal quality from the ISP infrastructure/devices also sounds like a possibility.

Hopefully we'll get ya sorted! A lot of good suggestions that I've seen so far and hopefully we can help you pinpoint what the issue is and where to go from here. *Toast :toast:

 

Help diagnose connection issue

Only other thing is to drop the profile speed, sounds like training and dropping, unless he is getting sync no service condition

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.