Windows 10: Need help with pc/ problem with administrator

* Unable to Sign In After Disabling Administrator Account **Issue:** I disabled the built-in Administrator account on my Windows PC using the following command in Command Prompt: ``` net user administrator /active:no ``` After logging out and trying to sign in again, I am unable to access my account. I can't log in to any other user account, and the built-in Administrator account remains disabled. **Steps Taken So Far:** 1. **Tried Safe Mode:** - I attempted to boot into Safe Mode to access the system but was unable to enter Safe Mode, even when trying the **Startup Settings**. 2. **Used

:)

 

router logs DoS attack from a local PC....

Well you did not say that you don't really know what you are doing. It's not a problem of course, but it changes things a little.

It's not even clear if the PC or the router is the problem at this time, so I suggested that you disable some unnecessary things which are usually known to cause many problems, sorry if those were too complicated.

• You could reset some network related stuffz on the PC as a next step. Open an elevated command prompt (run as administrator), and enter the followings on the PC:
  netsh int ip reset reset.log
  netsh int ipv6 reset
  netsh winsock reset
  netsh branchcache reset
  netsh advfirewall reset
  (note: You can export your current firewall rules in the "group policy" before the reset if it's needed for some reason)
  
  
• Btw, Would it be a problem to reset the router to the default settings if the things we are trying will not help? There is a menu point for that called "factory settings" (and also a little hole on the back if you prefer that one).. the Administrator username in the router after the reset would be admin and the password is probably on a sticker at the bottom of the router (special settings needed to go online with your ISP might be also necessary)
  This is not needed now (not yet), but perhaps the source of the problem is at the router and not the PC in question, so we may come to that eventually.

ps.: Do you have a second network card you could test in that PC and a different cable to rule out some hardware issues on the PC side?

 

No Administrator Rights On The PC (Windows 10)

Hi Fozia,

We appreciate your interest in Windows 10.

I suggest you to follow the below steps and check if it helps.

Step 1:

To start Windows 10 in safe mode with command prompt:

• Press Windows + I keys on the keyboard to open Settings menu.
• Select Update & security and click on Recovery.
• Go to Advanced startup and select
  Restart now.
• After your PC restarts to the Choose an option screen, select Troubleshoot
  > Advanced options > Startup Settings >Restart.
• After your PC restarts, select a startup setting as Safe Mode with command prompt by pressing the corresponding number.

Step 2:

Follow the below steps to enable Built in Administrator:

• 
  Open Command Prompt from Windows Recovery Environment.
  
• 
  Copy and paste the below command and press Enter.
  

net user administrator /active:yes

3. Close the Command Prompt.

4. Try to login though Built in Administrator and change the other user account privileges to Administrator.

5. You may create new user account also and assign the administrative privileges to the account.

I hope the above information helps. Kindly let us know if you need any further assistance with Windows. We are glad to assist you.

Thank you.

 

help to remote connect

not sure how to use both programs u 2 suggested, i need more helpful steps thanks