Windows 10: Need to use different drive/folder used by windows update

Ive repeatedly tried to update windows to ver 1809 but it always returns "update cannot install because of drive space". I'm unable to clear enough space on drive used by update. I have plenty of space in a different partition and also on an external drive but am unable to convince update to use either.. Was unlucky with support call (tools were down) so thought I'd ask you guys

:)

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.

 

SLI with different cards

Here is what is did
step 1:





step 2:





:/ i dont get this doe ?

okay ive done the same thing as you but i cant put the file back into the folder

• Copy nvlddmkm.sys in C:\Windows\System32\DriverStore\nv_dispi.inf_amd64_5518e59e8d3b48f4\ to C:\Windows\System32\drivers\ and replace the existing one.

that thing

 

?? How do I PW protect Folders in windows

hmmm?
Sharing files and folders overview You can share the files and folders stored on your computer, on a network, and on the Web. The method you choose depends on whom you want to share files with, and what computer they will use to access the files.

When you share files or folders, they are not as protected as they are when you do not share them. People with access to your computer or your network might be able to read, copy, or change files that are in a shared folder. You should always be aware that the files and folders that you share are available to other people and be sure to monitor your shared files and folders on a regular basis.

Important

If your computer is not joined to a domain, you can use the Network Setup Wizard to automatically turn file and printer sharing on or off. To start the Network Setup Wizard, click Start, click Control Panel, click Network and Internet Connections, and then click Network Setup Wizard.
If you both use the same computer

You can put the files you want to share in the Shared Documents folder. Files stored in the Shared Documents folder or its subfolders are always available to other users on your computer.

Step-by-step procedure
Note

If you are connected to a network domain, the Shared Documents, Shared Pictures, and Shared Music folders are not available.
If both computers are on the same network

You can share a folder or drive on your computer with others on the network. You can also control whether the files in the shared folder can be modified by other users.

If your computer is connected to a network domain, use this procedure:

Step-by-step procedure
If your computer is connected to a workgroup, use this procedure:

Step-by-step procedure
Note

If you are connected to a network domain, you will need to set the Access control for the folder or drive after sharing it. For more information, go to To set, view, change, or remove file and folder permissions.
If you want to share your files online

You can publish pictures and documents on the Web using the Web Publishing Wizard. The files will be stored in a private, online folder that you manage.

Step-by-step procedure

If you don't want others to access your files

You can prevent other users from accessing your folders and the files they contain. When your computer is connected to a domain, this is called setting permissions for your file or folder. When your computer is connected to a workgroup, this is called making your folders private.

If your computer is connected to a network domain, use this procedure:

Step-by-step procedure
If your computer is connected to a workgroup, use this procedure:

Step-by-step procedure

'HELP' it can be your friend *Smile