Windows 10: .Net TNS Listener Adapter

In Windows 11 and Server 2022The. Net TNS Listener Adapter is not being installed as a service even though the feature is turned on.Please advise

:)

 

Microsoft .NET Framework, Unhandled exception

Hi,

Welcome to Microsoft Community.

I suggest you to un-check and recheck .Net framework 3.5 and .Net framework 4.6 advance series from Windows features.

Try the following steps:

• Press Windows + R keys to open Run command.
• Type Appwiz.cpl and select "turn Windows feature on or off" from the left
• Uncheck .Net framework 3.5 and .Net framework 4.6 advance series.
• Restart the computer
• Repeat step 1 and 2 and check .Net framework 3.5 and .Net framework 4.6 advance series.
• Restart the computer.

Regards,

 

Both Net.tcp listener adapter & Net.pipe listener adapter service stopped

Please follow these steps from the Command Prompt.

a. Press Windows + X.

b. Click Command prompt (Admin mode)

c. Type ‘netsh int ip reset c:\resetlog.txt’

d. Press Enter.

e. Reboot the computer.

But no luck. Please help me.

https://answers.microsoft.com/en-us...hy-is-it/392c46ea-02c8-47a0-a6df-1b6c85dea25a

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs