Windows 10: new battery fitted aspire v not charging

just fitted a new battery lapp battery not charging

:)

 

New battery not charging


I have an Acer Aspire V3-771 laptop (which is three and a half years old) with its original battery. As the battery is not holding the charge for as long as it used to I decided to replace it. I inserted he new battery, which already showed a charge of 60%, and let it run down to the point when the laptop turned itself off. However, when I tried to recharge the battery, the battery icon showed "6% available, plugged in, not charging". I contacted the supplier of the battery and they sent me a new one. This showed an initial charge of 93% so, in view of my problem with the previous battery, I decided to try and charge it up to full capacity before letting it run down. But as soon as I tried this the battery icon showed "93% available, plugged in, not charging". So I unplugged the charger and again let the battery run down until the computer turned itself off. I plugged the charger in again but then got "6% available, plugged in, not charging". I have no problem charging the old battery, so can anyone please suggest what the problem might be? I have tried taking out the battery and unplugging the charger and holding down the power button for 30 seconds, but this hasn't worked. Grateful for any advice.

 

New battery not charging

I suggested uninstall, not re-install.

There's an extended version of those instructions - the same idea, but some additional steps.
Shut down hte machine
Remove the battery - run on AC power only
Device Manager > Batteries
Uninstall Microsoft ACPI-Compliant Control Method Battery
Shut down the machine

Remove AC power
Wait 1 minte
Insert Battery
Connect AC power
Start the machine

Microsoft ACPI-Compliant Control Method Battery should be reinstalled when the machine is booting

But, the .3 volts might be significant - I agree with Kbird

 

Battery charging advice


1) The battery charging stops when fully charged with the charger on, thus no need for manually switching off.

2) If the battery is at zero charge, the charger is used to run the Laptop and recharge the battery.

Depends on the manufacturer when charging starts, on mine anything less than 100%. Some seem to think a 70% charge as lengthening the lifetime of their batteries.

You only need to waft the mouse pointer over the standard Windows taskbar battery Icon to see the charge %.

An AIO desktop does not have a battery. It may well have PSU looking like a charger as some may use Laptop type MOBOs, basically fitted in the monitor casing.