Windows 10: New HDD Disk

Hey,

I've got a 111GB System Disk
A 232GB and a 297GB Disk and I'm thinking of buying a 1tb HDD disk
is this compatible with my pc because that disk probably requires some energy, do I need to remove some of the other disks for this disk to fit in?

:)

 

Installing a new HDD to replace a HDD of the same size that failed.

I have a Windows 10 OS installed on my C: drive. I had data stored on an HDD designated as D: drive. That second drive failed and was replaced by a new HDD. Both are the same size and type of drives, except different manufactures. The new HDD is not
listed in File Explorer. It is listed in Computer Management under Device Manager as a Disk drive. Disk Management under Storage does not list the new HDD.

I have tested the new HDD with software downloaded from the manufacture and it has passed all tests. At least that software was able to access the new drive and perform low level tests to see if it is operational.

Looking at the events log for this HDD, I find an event warning that says "Device ... was not migrated due to partial or ambiguous match." Opening up the properties indicates drivers have been installed. Reading the volume information results in: "Volume
information for this disk cannot be found"

I suspect that the problem with the volume information is associated with the warning in the event log. I removed the HDD, restarted the PC then shut it down to start the installation process over again. No change in the event log or status of the new
HDD. Can anyone suggest how I can get past that warning?

 

HDD Corrupt ?

Hi,

There are many possible reasons this issue is happening. We'd like to ask few questions below:

• What is the brand name of you Hard Disk Drive?
  
• How old is the HDD?
  

Since you already tried multiple troubleshooting steps, we suggest visiting the manufacturer's website. Find and download a hard drive diagnostic software to help resolve the issue.

Let us know how it goes.

 

HDD in a HDD caddy is not showing up in the disk management

Hi,

To assist you better, I would like to ask some questions:

• How are you connecting the HDD Caddy?
• What is the make and model of your computer?

If you are connecting the device using USB, I suggest you to check if other USB devices are recognized as USB devices or Other device. If it is displaying as other device, then the issue might be with the USB port. So, I suggest you to update the USB drivers
by following the steps below:

• Press Windows key + X, select Device Manager.
• Expand Universal Serial Bus Controller.
• Right click on the drive, select Update Driver Software and follow the on-screen prompts.

Keep us posted on the status for further assistance.