Windows 10: New M.2

Greetings,I've recently installed a second M.2 First one is my primary C: I installed a few games and it was working fine for a few days.Then suddenly it would Bluescreen Crash and restart my Windows 11 every time i would start a game.I installed and ran CrystalDiskMark and the numbers for both SEQ and RND were very strong.So the SSD Drive seems to be completely fine.I am up to date on my Drivers and even did a few clean re-installs using DDU. I also installed Nvidia Broadcast for the RTX Audia Drivers and it seemed to fix things for a few days.But now it's back and I am at a loss.Everytim

:)

 

M.2 SSD not being able to boot from it, windows doesn't recognise.

Ok, this is what happened after all the comments and suggestions, @dude: Thanx for the video, my mb had non e of those settings, it had the raid/option memory gene or achi. Can only choose one or the other. @Saltgrass, my settings did point out auto and enabled the pcie x4, gen 3. I did an bios flash as suggested, because my bios was not the latest version, after a reformat the m.2 was picked up, still cant install OS onto it as it states legacy not found, removed my dvd rom from the sata port to another, and the drive was found and installed. Only issue now is that it's still not my OS drive but it at least now works and is installed, but on the Intel rst drive the obtain memory gene option to enable is greyed out, and shows as disabled. However the program lists the M.2 and it is working 100%,. I installed overwhatch onto it, it performs perfectly. But will update the intel driver tonight and see if that makes any difference. Seems the bios flash enabled the settings listed by @dude that was not present pre-flash.

So the m.2 drive works. I can game off it and install omnto it. Can not install windows on it, gene memmory is enabled, pcie x4 is on and on auto detect, Motherbaord lists all the drives connected, motherboard ahs been updated to latest bios. After flash new settings became available, m.2 is now on memmory gene enabled not achi, windows os is enabled and fast boost is enabled, intel rst is installed and lists all the ssds and the m.2, however the m.2 on memmory gene is dissabled and the option to enable is greyed out. Will update the driver as Essenbe suggested of the m.2 and see if anything changes. Thank you all for the help, I can now atleast use my m.2

 

A new win install on a HDD messed up my win install on my m.2 SSD




- - - Updated - - -

Yes, I do think that is my problem, but I couldn't find a way to remedy it. Sorry for the screenshot being in Hungarian, if you need I can translate it. And don't mind the 500 MB partition, I tried to do a fix from a similar thread which suggested creating it, but later steps didn't prove successful.

 

Issue with upgrading to m.2 NVME, Help?

I've done what "ignatzsonic" has done, multiple times.

Image the existing SSD to another drive, which could be the internal HD or an external one. Use the imaging software to create a bootable USB rescue drive. Swap SSDs. Boot from the USB rescue drive, and restore the image to the new SSD. Use Disk Management to resize the main partition if the new SSD is larger than the old, and the imaging software didn't already do that.

Is the laptop in question the ASUS FX553VD? A little Web search suggests that it supports NVME M.2 SSDs, but I wish that I was certain. It worries me slightly that Crucial doesn't list any M.2 NVME SSD upgrades for it.