Windows 10: New NVME m.2 2tb drive being incorrectly recognized as the first NVME 1tb drive. Blue screen

In the picture below, my new 2Tb nvme 3D TLC NAND drive is not the brand that windows is reporting. Windows is showing 2 of the first nvme drive. Bios sees the drive. Getting Blue screen when I try to use the second drive that disk manager was able to partition.

:)

 

Windows is not recognizing an NVMe M.2 drive

Have Win 10Pro everything is fine except I can Not get a new NVMe M.2 to be recognized correctly by the OS it sees it as a SATA even though it is in a M.2 slot on Motherboard. I need more of an order of things to be done between the BIOS and Win 10. I
installed a Samsung 970 Pro 1 TB drive in a Z270X Gaming 7 MB and Win 10 has a problem and it sees it and formatted it as a Sata with only a little less than 500g of space???

 

replacing C: with larger M.2 NVme drive and move programs installed on D: to the new M.2 drive

I have a DELL Desktop Computer XPS XPS8920-7581SLV-PUS Intel Core i7 7th Gen 7700 desktop running Windows 10 Pro with the Toshiba 250 GB M.2 NVme drive as the C: drive and a 1TB hard disk as the D: drive. I have installed a couple of games and applications to the D: drive due to the size of the install files.

I am now planning to replace the Toshiba 250 GB M.2 drive with a Samsung 500 GB 970 EVO M.2 NVme drive.

The procedure I plan to use is to:

• clone the Toshiba drive to a new Western Digital SSD installed in a hard disk bay
  
• replace the Toshiba with the Samsung
  
• clone the new SSD back to the Samsung
  

At that point I should have a bootable C: on the Samsung NVme drive.

The next step would be to move the games and applications from the 1TB hard disk to the Samsung NVme drive since I now have the space for them.

However it is not really possible to just move installed applications due to all the Registry changes that would be needed.

The two applications are Visual Studio 2015 and 2017 (both Community Edition) and the games are World of Warcraft, Destiny 2, and Fallout 4 (the last being a Steam download).

So I am looking for advice on these changes.

Alternative approaches

It seems that I have a couple of options:

• clone the 1TB hard disk to the new SSD and just use the new SSD as D:
  
• uninstall the games and applications then reinstall them to the new C:
  
• create a D: partition on the new NVme drive and copy the installation folders there
  

The easiest approach would seem to be to clone the 1TB drive to the new SSD as D: and move on. However I would be missing out on the NVme goodness with the games as well as the Visual Studio programming environment.

The most straightforward approach would be to uninstall the games and applications from the 1TB hard disk and then reinstall them to the C: drive.

The applications are Visual Studio 2015 and Visual Studio 2017, both Community Edition. These would both be straightforward to uninstall from D: and reinstall to C:.

The games are World of Warcraft and Destiny 2 from Blizzard and Fallout 4 from Steam. These games will require long download time probably two or three days over my internet access. And I would have to start Fallout 4 all over again.

Concluding thoughts

Perhaps the best option would be to combine the first two options.

Since the Visual Studio uninstall and install would be fairly painless I could do that while leaving the games on the 1TB drive and then do the clone of the 1TB drive to the new SSD. Then at a later date I could move World of Warcraft and Destiny 2 over to the NVme drive.

I would think that working with Visual Studio would be easier and quicker from the NVme C: drive while the games would be quick and responsive enough if the game assets are on an SSD.

 

Clone present nvme pcie ssd to replacement nvme pcie ssd?

I have a 500GB M.2 2280 NVMe PCIe SSD (boot drive) that I want to replace with a higher capacity M.2 card.

Where do I put the new SSD during the NVMe to NVMe cloning process? My mobo only has one M.2 slot for NVMe SSD's so do I want to use an external adapter for one of the M.2 cards? If so, do you have a recommendation?

If you have solved this issue for your desktop or laptop I would like your advice on if and what extra hardware you needed during the cloning.

please remember that I am dealing with PCIe NVMe drives ONLY. NO Sata is involved except possibly for a connecting cable from the desktop to an adapter. I am experienced with cloning SATA III drives but cloning NVMe is a little
new to me.

Computer: Dell XPS 8920, 32GB ram.

Present SSD: KXG50ZNV512G NVMe Toshiba 512GB

New SSD: CT13049074 Crucial P1 NVMe PCIe M.2 SSD 1TB (or 2TB if available soon) or similar storage device.

Windows 10 Pro for Workstations, version 1809.