Windows 10: New PC build, BSOD, multiple errors

Hi,I have a new build and I'm experiencing BSODs since the installation processI managed to install the OS on the NVME disk on a different machine but even if I'm able to boot I'm getting a BSOD after around a couple of minutesI tried to check the Event Viewer but I see a lot of ERRORS and I'm unable to undesrstand which is causing the issueThe PC is running fine in safe mode with no ethernet connection, once I enabled it back it crashed even in safe modeI need desperately some help if possible :If needed I have the last DUMP if it helpsThanks in advance

:)

 

Multiple daily BSOD's on a new build with various different errors.


Multiple daily BSOD's on a new build with various different errors. - Windows 10 Forums

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt