Windows 10: New ram blue screen memory problem

https://www.dropbox.com/scl/fi/wbxoatwjg9pv98ahzxddf/122824-8328-01.zip?rlkey=y4ag2qqfjzyplqsjr7dcfjwjl&st=gxb2y3xl&dl=0I just just new ram 32gb 3200 i put it in and i started blue screening i thought it was because i didn't put it in properly it said memory management. i thought i fixed it then i started to blue screen again i thought it was from xmp but i still bsod when i turned it off this is my dump file in a dropbox

:)

 

Blue Screen Problems

Hello all. I have been plagued with frequent BSODs on my main computer. (see system specs for details) I am getting "Page Fault in Nonpaged Area", or the 0x50 stop error, blue-screens.
What I read on Google suggested that this blue-screen indicated a memory or hard drive error. I ran memtest86+, which passed, and chkdsk, which found no problems. I took all of my components down to stock clocks, and that didn't help. Does anyone have any experience or advice as to what I should try next?

 

Blue Screen Problems

How long did you let memtest run for? I would let it run overnight. Did you try running something like Intel Burn Test? It sounds like you took the steps I would suggest. I had that same motherboard (and E8400) and when I had that BSOD it was always memory related.

 

Frequent Blue Screen error on computer

Hi,



Thank you for writing to Microsoft Community Forums.



I understand that you are receiving Blue Screen error on your computer. I’ll certainly assist you with this.



However, please let us know:

• 
  When exactly are you getting the Blue Screen error?
  
• 
  What is the error message you receive?
  
• 
  Are you aware of any changes made to the computer recently?
  
• 
  What is the make and model of the computer?
  

I have analyzed the dump files shared by you and found that the error is caused by a Memory corruption.



I would suggest you to run a Windows Memory Diagnostic check on the computer to check test the memory installed on the computer. Refer the steps
mentioned below:

1. 
   Press
   Windows key + R, to open Run dialog box.
   
2. 
   Type
   mdsched and click on OK.
   
3. 
   Click on
   Restart now and check for problems.
   

Also, if you are using two RAM sticks, I would suggest you to using one RAM stick and see if that helps.



Let us know how it goes.



Regards,

Nikhar Khare

Microsoft Community - Moderator